Browsing by Department 02.11. Department of Metallurgical and Materials Engineering

Showing results 46 to 99 of 99 < previous 
Issue DateTitleAuthor(s)
2020Improvement of mechanical properties by means of titanium alloying to steel teeth used in the excavatorKeleş, Ali; Yıldırım, Mehmet 
2019In situ reduction of chloroauric acid (HAuCl4) for generation of catalytic Au nanoparticle embedded triazine based covalent organic polymer networksDursun, Sami ; Yavuz, Emine; Çetinkaya, Zeynep 
2022Intrinsic Organic Semiconductors as Hole Transport Layers in p-i-n Perovskite Solar CellsSusic, Isidora; Zanoni, Kassio P. S.; Paliwal, Abhyuday; Kaya, İsmail C. ; Hawash, Zafer; Sessolo, Michele; Bolink, Henk J.
2023Investigation of biochemical properties of flash sintered ZrO2–SnO2 nanofibersÇetinkaya, Zeynep ; Güneş, Eda; Şavklıyıldız, İlyas 
2023Investigation of photocatalytic activity (under visible light) of ultrathin CZTS films produced in different thicknesses by PLD methodDursun, Sami ; Sarıipek, Fatma Bayram ; Kılıç, Sümeyye; Gezgin, Serap Yiğit; Gündoğdu, Yasemin; Şükür Kılıç, Hamdi
2020INVESTIGATION OF POROUS ANODIC FILM FORMATION ON AA1050 BY ELECTROCHEMICAL IMPEDANCE SPECTROSCOPYDanışman, M.; Kocabaş, Mustafa ; Curioni, M.; Cansever, N.
2022Investigation of structural and magnetic characteristic of pure and M-doped (M: Fe and Cu) MoS2 thin filmsKıvrak, Burak ; Akyol, Mustafa; Ekicibil, Ahmet
2022Investigation of structural, magnetic and microwave absorption properties of NixCo1-xFe2O4/Ni:ZnO (x:0.0, 0.5, and 1.0) embedded epoxy compositesKıvrak, Burak ; Tümen, Kutluhan Utku; Karaaslan, Muharrem; Akyol, Mustafa
2023The investigation of the effect of sodium chlorite and phosphonic acid catalysts on cotton bleaching process conditionsYildiz, Salih Zeki; Dursun, Sami 
2021Investigation of the Structural Properties of Age-Hardenable Commercial Aluminum Alloys with Various Zn and Mg ContentsKaplan, Yusuf; Taşar, Sercan; Yıldırım, Mehmet 
2022MICROSTRUCTURAL EVOLUTION AND OXIDATION BEHAVIOR OF Fe-4Cr-6Ti FERRITIC ALLOY WITH Fe2Ti LAVES PHASE PRECIPITATESDemirel, Ahmet; Çetin, Emre Can; Karakuş, Ali; Ataş, Mehmet Şahin ; Yıldırım, Mehmet 
2021Microstructural, wear and corrosion characteristics of boronized AISI 904L superaustenitic stainless steelÇetin, Melik; Günen, Ali; Kalkandelen, Müge; Karakaş, Mustafa Serdar 
2021Microstructure, phase relationships and microhardness of Fe60Al40-nHfn alloys (n=1, 3, and 5 at.%)Yıldırım, Mehmet ; Çetinbakış, Neşe; Culu, Ayşe; Akdeniz, M. Vedat; Mekhrabov, Amdulla O.
2021Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al(0.07)Co(1.26)Cr(1.80)Fe(1.42)Mn1.35Ni1.10 high entropy alloyKarakaş, Mustafa Serdar ; Günen, Ali; Çarboğa, Cemal; Karaca, Yusuf; Demir, Mehmet; Altınay, Yasemin; Erdoğan, Azmi
2020Morphological Development, Coarsening, and Oxidation Behavior of Ni-Al-Nb SuperalloysAtaş, Mehmet Şahin ; Yıldırım, Mehmet 
2021N-tipi SnO2 nanofiberlerin üretimi ve fotokatalitik özelliklerinin geliştirilmesiDursun, Sami 
2021Ni-Al-X (X = Nb ve Y) esaslı süperalaşımların mikroyapısal özelliklerinin ve oksidasyon davranışlarının incelenmesiAtaş, Mehmet Şahin 
2022Ni-FeNi3-Fe3O4 METALİK NANOALAŞIMLARIN HİDROTERMAL YÖNTEMLE SENTEZİ VE KARAKTERİZASYONUAtaş, Mehmet Şahin ; Altıntaş Yıldırım, Özlem 
2019Nickel fluoride as a surface activation agent for electroless nickel coating of anodized AA1050 aluminum alloyKocabaş, Mustafa ; Örnek, C.; Curioni, M.; Cansever, N.
2019ÖSTEMPERLEME SICAKLIK VE SÜRESİNİN ÖSTEMPERLENMİŞ SÜNEK DÖKME DEMİRLERİN MİKRO YAPI VE SERTLİĞİNE ETKİSİÖztürk, Emre; Yıldırım, Mehmet 
2022Pack-Boriding of Monel 400: Microstructural Characterization and Boriding KineticsGünen, Ali; Keddam, Mourad; Erdoğan, Azmi; Karakaş, Mustafa Serdar 
2019Pack-Boriding of Pure Iron with Powder Mixtures Containing ZrB2Çalık, A.; Uçar, N.; Karakaş, M. S. ; Tanış, H.
2023PANI-coated YIG/CFO hybrid composites as advanced electromagnetic wave absorber through X-bandKıvrak, Burak ; Sergun, Atalay; Karaaslan, Muharrem; Akyol, Mustafa
2023Phase (1T/2H) dependent electromagnetic wave absorbing performance of flower-like MoS2 nanosheetsAka, Cemal; Kıvrak, Burak ; Teksen, Fikret Alpay; Akyıldız, Hasan ; Akgöl, Oğuzhan; Karaaslan, Muharrem; Akyol, Mustafa
2018Photocatalytic activity and dielectric properties of hydrothermally derived tetragonal BaTiO3 nanoparticles using TiO2 nanofibersKüçük, Öznur; Teber, Seda; Kaya, İsmail Cihan ; Akyıldız, Hasan ; Kalem, Volkan 
2020Photoluminescence and piezoelectric behaviour of Y2Zr2O7 pyrochlore-based multifunctional materials and the influence of Eu3+ and Sm3+Öztürk, Esra; Karacaoğlu, Erkul; Kalem, Volkan 
2021Photoluminescence and piezoelectric behaviour of Yb2S2O7 pyrochlore based multifunctional smart advanced materials and the influence of Lu3+ and Eu3+Öztürk, Esra; Karacaoğlu, Erkul; Kalem, Volkan ; Özpozan, Nilgün
2022PMN-PT nanoparticle/SnO2 nanofiber heterostructures: Enhanced photocatalytic degradation performance by ultrasonic wave induced piezoelectric fieldDursun, Sami ; Akyıldız, Hasan ; Kalem, Volkan 
2020Polimerik Güneş Hücrelerinde Ag Nanopartikül Katkılı TiO2 Tampon Tabakasının Kendiliğinden Organize Olan Tek Tabaka Moleküller (SAM) ile Modifiye EdilmesiYurtdaş, Semih ; Can, Mustafa ; Karaman, Mustafa ; Tozlu, Cem 
2022Preparation of poly(?-caprolactone) nanofibrous mats incorporating graphene oxide-silver nanoparticle hybrid composite by electrospinning method for potential antibacterial applicationsSarıipek, Fatma Bayram ; Sevgi, Fatih; Dursun, Sami 
2021Processing of anode slime with deep eutectic solvents as a green leachantTopçu, Mehmet Ali; Kalem, Volkan ; Rüşen, Aydın
2021Processing optimization of SiO2-capped aluminum-doped ZnO thin films for transparent heater and near-infrared reflecting applicationsCan, Hilal Aybike; Tönbül, Beyza; Pişkin, Fatih; Öztürk, Tayfur; Akyıldız, Hasan 
2023Production of CuCoO2 nanoparticle/SnO2 nanofiber heterostructures for visible light photocatalytic applicationsDursun, Sami ; Akyıldız, Hasan ; Kalem, Volkan 
2020Production of CuO-WO3 hybrids and their dye removal capacity/performance from wastewater by adsorption/photocatalysisDursun, Sami ; Koyuncu, Suna Nur; Kaya, İsmail Cihan ; Kaya Güzel, Gülcihan ; Kalem, Volkan ; Akyıldız, Hasan 
2023Production of novel hazelnut shell-based semi-IPN biocomposite absorbents and their use in removing heavy metal ions from waterDursun, Sami 
2022Production of red mud based nanofibers and their potential in arsenate removal from waste waterÇetinkaya, Zeynep ; Kalem, Volkan 
2020Properties and Corrosion Behavior of Chromium and Vanadium Carbide Composite Coatings Produced on Ductile Cast Iron by Thermoreactive Diffusion TechniqueGünen, Ali; Kalkandelen, Müge; Karahan, İsmail Hakkı; Kurt, Bülent; Kanca, Erdoğan; Gök, Mustafa Sabri; Karakaş, Mustafa Serdar 
2020Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C PowdersGünen, Ali; Karahan, İsmail Hakkı; Karakaş, Mustafa Serdar ; Kurt, Bülent; Kanca, Yusuf; Çay, Vedat Veli; Yıldız, Murat
2022Refractory-Metal-Based Chalcogenides for EnergyÖzel, Faruk; Arkan, Emre; Coşkun, Halime; Deveci, İlyas ; Yıldırım, Murat; Yıldırım, Mehmet ; Ersöz, Mustafa; Kuş, Mahmut 
2019Saf Alüminyuma Uygulanan İki Aşamalı Anodik Oksidasyon İşleminde Por Genişletme Süresinin Oksit Porlar Üzerindeki Etkilerinin İncelenmesiYılmaz, Halil; Kocabaş, Mustafa 
2021Solution processed aluminum-doped ZnO thin films for transparent heater applicationsTönbül, Beyza; Can, Hilal Aybike; Öztürk, Tayfur; Akyıldız, Hasan 
2021Solution processed glass/fluorine-doped tin oxide/aluminum-doped zinc oxide double layer thin films for transparent heater and near-infrared reflecting applicationsTönbül, Beyza; Can, Hilal Aybike; Öztürk, Tayfur; Akyıldız, Hasan 
2022Spray-Pyrolyzed Tantalium-Doped TiO2Compact Electron Transport Layer for UV-Photostable Planar Perovskite Solar Cells Exceeding 20% EfficiencyÇulu, Ayşe; Kaya, İsmail Cihan ; Sönmezoğlu, Savaş
2019Stable CuCrO2 nanoparticles - ZnO fibres p-n heterostructure system for effective photocatalytic activityBaylan, Elif; Akyıldız, Hasan ; Altıntaş Yıldırım, Özlem 
2022Structural properties and cyclic oxidation behavior of Ni-Al-Y superalloysAtaş, Mehmet Şahin ; Yıldırım, Mehmet 
2021Synthesis and characterization of nanoparticles reinforced epoxy based advanced radar absorbing compositesTümen, Kutluhan Utku; Kıvrak, Burak ; Alkurt, Fatih Ozkan; Akyol, Mustafa; Karaaslan, Muharrem; Ekicibil, Ahmet
2022Synthesis of Glucose/Fructose Sensitive Poly(ethylene glycol) Methyl Ether Methacrylate Particles with Novel Boronate Ester Bridge Crosslinker and their Dye Release ApplicationsYıldırım, Şeküre; Akyıldız, Hasan ; Çetinkaya, Zeynep 
2019Temporal evolution, coarsening behavior and oxidation resistance of Ni-15Al superalloyAtaş, Mehmet Şahin ; Yıldırım, Mehmet 
2020Ternary and quaternary thiospinel nanocrystals with adjustable compositions: effects of Band-Gaps and nanostructures on Visible-Light-Driven photocatalytic H-2 evolutionSarılmaz, Adem; Yanalak, G.; Aslan, E.; Akyıldız, Hasan ; Patir, I. H.; Özel, Faruk
2020Tribocorrosion behavior of surface-modified AISI D2 steelKarakaş, Mustafa Serdar 
2018UV/visible light active CuCrO2 nanoparticle-SnO2 nanofiber p-n heterostructured photocatalysts for photocatalytic applicationsDursun, Sami ; Kaya, İsmail Cihan ; Kalem, Volkan ; Akyıldız, Hasan 
2020Visible light active heterostructured photocatalyst system based on CuO plate-like particles and SnO2 nanofibersDursun, Sami ; Kaya, İsmail Cihan ; Kocabaş, Mustafa ; Akyıldız, Hasan ; Kalem, Volkan 
2022WEDM machining of MoNbTaTiZr refractory high entropy alloyGünen, Ali; Ceritbinmez, Ferhat; Patel, Kunjal; Akhtar, Mst Alpona; Mukherjee, Sundeep; Kanca, Erdoğan; Karakaş, Mustafa Serdar 
2019Yeni nesil Zn2SnO4–GO–M (M: Mn, Co) foto katalizör kompozit yapıların sentezi, karakterizasyonu ve antibakteriyel özelliklerinin incelenmesiAltıntaş Yıldırım, Özlem ; Gökçe, İsa; Yıldırım, Mehmet Can; Ünalan, Hüsnü Emrah; Sönmezoğlu, Savaş; Öztürk, Teoman