Issue Date | Title | Author(s) |
2022 | The aerodynamic effects of blade pitch angle on small horizontal axis wind turbines | Kaya, Mehmet Numan; Uzol, Oguz; Ingham, Derek; Köse, Faruk ; Büyükzeren, Rıza |
2021 | Aerodynamic Optimization of a Swept Horizontal Axis Wind Turbine Blade | Kaya, Mehmet Numan; Köse, Faruk ; Uzol, Oğuz; Ingham, Derek; Ma, Lin; Pourkashanian, Mohamed |
2020 | Ağır Vasıta Hava Kompresörü Piston Segmanı Aşınması Durumlarında K-En Yakın Komşu Algoritmasının Sınıflandırma Performansının İncelenmesi | Gül, Emre; Kalyoncu, Mete |
2020 | AISI 304 PASLANMAZ ÇELİK SACIN HİDROMEKANİK DERİN ÇEKİLMESİ | Türköz, Mevlüt |
2021 | Alternative System Design for High Temperature Solid Particle Erosion Wear Problem | Demirci, Musa; Bağcı, Mehmet |
2023 | Analysis of the azimuth angles of a medium-scale PV system in non-ideal positions for roof application | İspir, Murat; Bakırhan, Mahmud; Aksoy, Muharrem Hilmi |
2021 | An analysis of the effect of pressure angle change on bending fatigue performance in asymmetrical spur gears | Demet, Seyit Mehmet ; Ersoyoğlu, Ali Serhat |
2023 | An Application of the Bees Algorithm to Pulsating Hydroforming | Öztürk, O.; Şen, M.A.; Kalyoncu, M. ; Halkacı, H.S. |
2022 | APPLICATION OF THE BEES ALGORTIHM UPON HYDRAULIC CYLINDER DESIGN AND OPTIMIZATION | Sözen, Betül; Kalyoncu, Mete ; Şahin, Ömer Sinan |
2021 | ARI ALGORİTMASI (AA) VE PARÇACIK SÜRÜ OPTİMİZASYONU (PSO) KULLANARAK ÇEYREK ARAÇ MODELİ TASARIM PARAMETRELERİNİN BELİRLENMESİ | Eser, Onur; Çakan, Abdullah ; Kalyoncu, Mete ; Botsali, Fatih |
2021 | Artificial Potential Field Algorithm for Obstacle Avoidance in UAV Quadrotor for Dynamic Environment | Maarif, A.; Rahmaniar, W.; Vera, M.A.M.; Nuryono, A.A.; Majdoubi, R.; Çakan, Abdullah |
2019 | Asimetrik düz dişli çarkların eğilme gerilmeleri altında yorulma performansının deneysel olarak incelenmesi | Demet, Seyit Mehmet |
2022 | Assessment of Wind Energy Potential and Current Usage status in Turkey and in the World | Kose, Suleyman; Köse, Faruk |
2021 | Attack Helicopter Camera Carrying and Balancing System Design | Kavlak, Koray ; Taner, Y.O. |
2023 | Automatic Control of Recirculation System for Respiratory Control | Jovanovic, Milos; Dihovicni, Djordje; Aksoy, Muharrem Hilmi |
2022 | Backstepping Sliding Mode Control for Inverted Pendulum System with Disturbance and Parameter Uncertainty | Ma'arif, A.; Vera, M.A.M.; Mahmoud, M.S.; Ladaci, S.; Çakan, Abdullah ; Parada, J.N. |
2023 | Bakır Nanopartikülün Kesme Sıvısı Katışkısı Olarak Kullanılabilirliğinin İncelenmesi | Şirvan, Onur Can ; Çetin, Muhammet Hüseyin ; Temel, Farabi ; Özçelik, Babür; Türköz, Mevlüt |
2022 | Behaviors of Removing Diesel Oil from Water with PS/Ti4O7 Composite Nanofibers: Modeling Diesel Oil Sorption Capacity for Tap Water and Investigation of the Effects of pH on Sorption at Different Temperatures for Times | Dinçer, Kevser ; Özaytekin, İlkay |
19-Feb-2021 | Bir Sıvı Taşıyan Tank Tertibatı Çalkalama Sistemi | Aksoy, Muharrem Hilmi ; Alişan Lojistik |
2021 | Bluetooth Controlled Hexapod Robot Design | Kavlak, Koray ; Kartal, İbrahim Ali |
2023 | Cascade Proportional Derivative Controller For A Flexible Link Robot Manipulator Using The Bees Algorithm | Çakan, Abdullah ; Kalyoncu, Mete ; Gümüş, Mehmet Sefa |
2019 | CFD MODELLING OF INDUSTRIAL AIR CURTAINS WITH HEATING UNIT | Aksoy, Muharrem Hilmi ; Yağmur, Sercan ; Doğan, Sercan |
2023 | Combined effect of fiber hybridization and matrix modification on mechanical properties of polymer composites | Demir, Okan ; Yar, Adem; Eskizeybek, Volkan; Avci, Ahmet |
2021 | Comparative Performance Analysis of Combined Power Systems Trilateral Cycle-Organic Rankine Cycle (TLC-ORC) and Organic Rankine Cycle Organic Rankine Cycle (ORC-ORC) | Bilir Sağ, Nagihan ; Özçelik, Mehmet |
2020 | Comparative study on the performances of solar air collectors with trapezoidal corrugated and flat absorber plates | Darıcı, Selçuk ; Kılıç, Anıl |
2023 | Comparison of mechanical properties of the Type 1 and Type 2 composite hydraulic cylinder designs: A numerical study | Coşkun, Taner ; Sahin, Omer Sinan |
2023 | A comprehensive experimental study of enhanced solid particle erosive resistance on the inner/outer surface of graphene nanoplatelets modified basalt/epoxy composite pipe | Sepetcioğlu, Harun; Demet, Seyit Mehmet ; Bağcı, Mehmet |
2021 | Computational Study on the Effect of the Staggered Ribs on Heat Transfer Phenomena Between the Horizontal Plates | Göktepeli, İlker ; Atmaca, Ş. Ulaş |
2019 | Control of the flow past a sphere near a flat wall using passive jet | Okbaz, Abdulkerim; Özgören, Muammer; Doğan, Sercan ; Canpolat, Çetin; Akıllı, Hüseyin; Şahin, Beşir |
30-Dec-2021 | Çift Taraflı Sac Hidroşekillendirmede Şekillendirilebilirliğin Artırılması İçin Yükleme Eğrilerinin Adaptif Kontrolle Optimize Edilme Yöntemi | Halkacı, Hüseyin Selçuk ; Akay, S. Burak; Öztürk, Ekrem |
2020 | Çift Taraflı Sac Hidroşekillendirmede Yükleme Eğrilerinin Adaptif Kontrolle Optimize Edilerek Şekillendirilebilirliğin Artırılması | Halkacı, Hüseyin Selçuk ; Türköz, Mevlüt ; Dilmeç, Murat |
2022 | Deneysel Tasarım Yöntemleri İle Bir Santrifüj Pompa Çarkında Dengeleme Deliği Tasarım Optimizasyonu | Koçak, Saim ; Sefacı, Selahattin; Babayiğit, Osman |
2022 | Design of a Three Degrees of Freedom (3R) Drawing Robot and Optimal Trajectory Control Using The Bees Algorithm | Çinar, Muhammet Ali; Kalyoncu, Mete ; Sen, Muhammed Arif |
2022 | Design of Mobile Robot with Klann Walking Mechanism to Overcome the Set and Step Type Obstacle | Yongul, Abdullah ; Kavlak, Koray |
2021 | Design of Mobile Robot with Strandbeest Walking Mechanism to Overcome the Set Type Obstacle | Kavlak, Koray ; Kartal, I.A. |
2022 | Design of Quadruped Mobile Robot with Strandbeest Walking Mechanism to Overcome Concave and Ramp Type Obstacles | Kavlak, Koray ; Yöngül, Abdullah |
2022 | Design of the composite hydraulic cylinder with geodesic dome trajectory: A numerical study | Coşkun, Taner ; Şahin, Ömer Sinan |
2023 | Design, Fabrication and Performance Tests of a Double-sided Sheet Hydroforming Test System | Urmamen, Mustafa Kemal; Ataş, Gürkan; Dilmeç, Murat; Türköz, Mevlut; Özturk, Osman; Halkacı, Hüseyin Selçuk |
2020 | Design, manufacture and thermal analysis of a single pass solar air collector at different mass flow rates | Darıcı, Selçuk |
2022 | DIGITAL TRANSFORMATION NEED ANALYSIS: A RESEARCH ON MANUFACTURING BUSINESSES IN KONYA AND KARAMAN (TR 52) PROVINCES | Aytar, Oğuzhan; Soy, Hakkı; Botsalı, Fatih Mehmet |
2021 | Dikey eksenli su türbinlerinde art izi bölgesinin sayısal ve deneysel olarak incelenmesi | Yağmur, Sercan |
2023 | Dimension Optimization of Polycentric Knee Mechanism Using the Bees Algorithm and Genetic Algorithm | Gümüş, Mehmet Sefa ; Çakan, Abdullah ; Kalyoncu, Mete ; Ayğahoğlu, Mert Eren |
2021 | DÖRT AYAKLI ROBOTLARIN MODELLENMESİ, KONTROLÜ VE ENGEBELİ YÜZEYLERDE YÜRÜYÜŞÜ ÜZERİNE BİR LİTERATÜR ARAŞTIRMASI | Şen, Muhammed Arif ; Kalyoncu, Mete |
2020 | Dört ayaklı bir robotun engebeli yüzeylerde yürüme analizi ve kontrolü | Şen, Muhammed Arif |
2020 | Dört Ayaklı Robotlar için Üç Serbestlik Dereceli Bacak Tasarımı ve Kesir Dereceli PID (PI?D?) Tabanlı Kontrolü | Şen, Muhammed Arif ; Bakircioğlu, Veli; Kalyoncu, Mete |
2019 | Dört ayaklı yürüyen bir robotun tek bacağı için arı algoritması kullanılarak kontrolcü tasarımı | Yöngül, Abdullah |
2022 | EFFECT OF AZIMUTH ANGLE ON THE PERFORMANCE OF A SMALL-SCALE ON-GRID PV SYSTEM | Aksoy, Muharrem Hilmi ; Çiylez, İsmail; Ispir, Murat |
2020 | Effect Of Dynamic Viscosity On Nanofiber Diameters And Electrical Conductivity Of Polyacrylonitrile Nanofibers Doped Nano-Cu Particles | Mpukuta, Olivier M.; Dinçer, Kevser ; Özaytekin, İlkay |
2022 | The effect of halloysite nanotube modification on wear behavior of carbon-aramid fiber reinforced hybrid nanocomposites | Çetin, Mehmet Emin; Baştosun, Yusuf; Tatar, Ahmet Caner ; Çetin, Muhammet Hüseyin ; Demir, Okan ; Önal, Gürol ; Avcı, Ahmet |
2020 | The effect of nanoclay particles on the incubation period in solid particle erosion of glass fibre/epoxy nanocomposites | Bağcı, Mehmet ; Demirci, Musa; Şükür, Emine Feyza; Kaybal, Halil Burak |
2022 | Effect of oil pressure upon filament wound basalt/glass fibers hybrid polymer based composite pipes subjected to low velocity impact | Demirci, Mehmet Turan; Şahin, Ömer Sinan |
2022 | Effect of saltwater on the mechanical properties of basalt/carbon/glass-epoxy hybrid composites | Esleman, Esmael A.; Onal, Gurol |
2021 | The Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Composites | Aslan, Abdullah; Salur, Emin; Güneş, Aydın; Şahin, Ömer Sinan ; Karadağ, Hakan Burak; Akdemir, Ahmet |
2021 | Effects of cryogenic and warm temperatures on quasi-static penetration resistance of carbon-aramid hybrid nanocomposites reinforced using halloysite nanotubes | Çetin, Mehmet Emin; Tatar, Ahmet Caner ; Demir, Okan ; Önal, Gürol ; Avcı, Ahmet |
2022 | Effects of extreme low temperatures on the impact behavior of boron nitride nanofillers added carbon fiber/epoxy composite tubes | Kara, Memduh; Tatar, Ahmet Caner ; Kırıcı, Muhammed; Kepir, Yusuf; Günöz, Alper; Avcı, Ahmet |
2023 | Effects of geodesic dome trajectories on the specific strength of composite overwrapped pressure vessels: FE modelling | Coşkun, Taner ; Şahin, Ömer Sinan |
2021 | The effects of harsh aging environments on the properties of neat and MWCNT reinforced epoxy resins | Aslan, Abdullah; Salur, Emin; Düzcükoğlu, Hayrettin; Şahin, Ömer Sinan ; Ekrem, Mürsel |
2022 | Effects of low-velocity impact on vibration behaviors of polyamide fiber-reinforced composites | Coskun, Taner ; Yar, Adem; Demir, Okan ; Sahin, Ömer Sinan |
2021 | Effects of mass flow rate and equivalence ratio on laminar premixed methane air flame | Atmaca, Şükrü Ulaş |
2023 | Effects of thickness, fibre orientation and fabric textile on the low-velocity impact performances of thermoset and thermoplastic composites | Kayaaslan, Melihcan; Coşkun, Taner ; Unlu, Ulaç Murat; Şahin, Ömer Sinan |
2020 | Eliptik borulu evaporatörlerde dış akış karakteristiklerinin incelenmesi | Doğan, Sercan |
2022 | Energy analysis and performance comparison of transcritical CO2 supermarket refrigeration cycles | Çalışkan, Oğuz ; Ersoy, H. Kürşad |
2022 | Erosion of ceramic coating applications under the influence of APS and HVOF methods | Demirci, M.; Bağcı, Mehmet |
2021 | Erosion Resistance of CFRP Composite Materials with Different Fiber Weaves Exposed to Cryogenic Treatment | Demirci, Musa; Bağcı, Mehmet |
2019 | Erosive wear of glass/epoxy composites coating filled with hexagonal boron nitride nanoparticles | Bağcı, Mehmet ; Özcan, F. |
2021 | Evaluation of grasp capability of a gripper driven by optimal spherical mechanism | Acar, Osman; Sağlam, Hacı; Şaka, Ziya |
2019 | Evaluation of low-velocity impact behavior of epoxy nanocomposite laminates modified with SiO2 nanoparticles at cryogenic temperatures | Tatar, Ahmet Caner ; Kaybal, Halil B.; Ulus, Hasan; Demir, Okan ; Avcı, Ahmet |
2023 | Examination of air flow characteristics over an open rectangular cavity between the plates | Göktepeli, İlker ; Atmaca, Ulaş |
2022 | Experimental comparison of straight flanging and rotary die bending based on springback | Livatyalı, Haydar; Turan, Salih Emrah; Birol, Feriha; Türköz, Mevlüt |
2021 | Experimental evaluation of different spectral methods for damage estimation of an electrical panel bracket mounted on a military wheeled vehicle | Gümüş, Mehmet Sefa ; Erdemir, Abdullah; Alver, Veysel; Kalyoncu, Mete |
2022 | An experimental evaluation on the dynamic response of water aged composite/aluminium adhesive joints: Influence of electrospun nanofibers interleaving | Ulus, Hasan; Kaybal, Halil Burak; Berber, Nihat Erdem; Tatar, Ahmet Caner ; Ekrem, Mürsel; Ataberk, Necati; Avcı, Ahmet |
2023 | Experimental Investigation of Absorption And Thermal Analysis of Different Types of Nanoparticles With Motor Oil Based Nanofluids | Yapıcı, Rafet ; Alenezy, Jasim; Hameed, Amar Hasan |
2022 | Experimental investigation of axial compression behavior after low velocity impact of glass fiber reinforced filament wound pipes with different diameter | Gemi, Dilek Soylu; Şahin, Ömer Sinan ; Gemi, Lokman |
2019 | EXPERIMENTAL INVESTIGATION OF SOLAR/WIND HYBRID SYSTEM FOR IRRIGATION IN KONYA, TURKEY | Köse, Faruk ; Aksoy, Muharrem Hilmi ; Özgören, Muammer B. |
2021 | Experimental investigation of the effect of diameter upon low velocity impact response of glass fiber reinforced composite pipes | Gemi, Dilek Soylu; Şahin, Ömer Sinan ; Gemi, Lokman |
2022 | An experimental performance comparison of Newtonian and non-Newtonian fluids on a centrifugal blood pump | Önder, Ahmet ; Yapıcı, Rafet ; İncebay, Ömer |
2019 | Experimental study and analysis of machinability characteristics of metal matrix composites during drilling | Salur, Emin; Aslan, Abdullah; Kuntoğlu, Mustafa; Güneş, Aydın; Şahin, Ömer Sinan |
2021 | Experimental study of a micro-scale sloped solar chimney power plant | Güzel, Muhammed Hüseyin ; Ünal Ercan, Hatice ; Köse, Faruk |
2024 | Experimental study on cylinder wake control using forced rotation | Aksoy, M.H.; Yagmur, S.; Dogan, S.; Goktepeli, I. ; Ispir, M. |
2018 | Experimental Study on Fatigue Fracture Damage of Symmetric Spur Gear Tooth | Demet, Seyit Mehmet ; Ersoyoğlu, Ali Serhat |
2022 | Farklı Bağ Kaplama Uygulamalarının Yüksek Sıcaklık ve Katı Partikül Erozyon Aşınmasına Etkisi | Demirci, Musa; Bağcı, Mehmet |
2021 | Farklı tiplerdeki çark kanatlarının santrifüj kalp destek pompa performansına etkisinin sayısal olarak incelenmesi | Usca, Üsame Ali; Uzun, Mahir; Yapıcı, Rafet ; İncebay, Ömer |
2018 | Fatigue Fracture Behaviour of Asymmetric Spur Gear Tooth Under Cyclic Loading | Demet, Seyit Mehmet ; Ersoyoğlu, Ali Serhat |
2022 | Filament Sarım Bazalt / Epoksi Kompozit Boruların İç Yüzey Erozif Aşınma Davranışına Partikül Hızı ve Çarpma Açısının Etkisi | Demet, Seyit Mehmet ; Sepetçioğlu, Harun; Bağcı, Mehmet |
4-Dec-2020 | Flake valsi çıkışında geliştirilen yoğuşturucu | Şahin, Ömer Sinan ; İmaş Makina |
2023 | Formability improvement in Ti-6Al-4 V sheet at room temperature by pulsating hydraulic bulging: experimental and numerical investigations | Öztürk, Osman ; Korkmaz, Habip G.; Ataş, Gürkan; Aydın, Mevlut; Türkoz, Mevlut; Toros, Serkan; Dilmeç, Murat |
2023 | FUZZY LOGIC-BASED MODELING OF A CENTRIFUGAL BLOOD PUMP PERFORMANCE VIA EXPERIMENTAL DATA OF NEWTONIAN AND NON-NEWTONIAN FLUIDS | Önder, Ahmet ; Güzel, Muhammed Huseyin; İncebay, Omer; Sen, Muhammed Arif ; Yapıcı, Rafet ; Kalyoncu, Mete |
2021 | The fuzzy logic-based modeling of a micro-scale sloped solar chimney power plant | Güzel, Muhammed Hüseyin ; Ünal Ercan, Hatice ; Önder, Ahmet ; Şen, Muhammed Arif ; Köse, Faruk |
2022 | Fuzzy-based modeling and speed optimization of a centrifugal blood pump using a modified and constrained Bees algorithm | İncebay, Ömer ; Önder, Ahmet ; Arif, Şen, Muhammed; Yapıcı, Rafet ; Kalyoncu, Mete |
2021 | A general review on the thiospinels and their energy applications | Özel, F. ; Kılıç, H. S. ; Coşkun, H. ; Deveci, I. ; Sarılmaz, A. ; Balıkçıoğlu, A. ; Ersöz, M. ; Kuş, Mahmut |
2020 | Graphene nanoplatelet modified basalt/epoxy multi-scale composites with improved tribological performance | Şükür, Emine Feyza; Önal, Gürol |
2019 | Grey Wolf Optimizer Based Tuning of a Hybrid LQR-PID Controller for Foot Trajectory Control of a Quadruped Robot | Şen, Muhammed Arif ; Kalyoncu, Mete |
2018 | Güneş Bacası Güç Sistemlerinin PV ve Rüzgar Güç Sistemleri ile Karşılaştırılması | Köse, Faruk |
2020 | Hava Kompresörü Verimliliğine Basınç Yükseltici Kullanımının Etkisinin İncelenmesi | Göçer, Duran Arif; Yiğit, Ömer; Kalyoncu, Mete |
2021 | Heuristic optimization of impeller sidewall gaps-based on the bees algorithm for a centrifugal blood pump by CFD | Önder, Ahmet ; İncebay, Ömer ; Şen, Muhammed Arif ; Yapıcı, Rafet ; Kalyoncu, Mete |
2020 | Hidromekanik sıvama kalıp ve yöntem parametrelerinin benzetim yöntemine göre belirlenmesi | Halkacı, Mehmet; Dilmeç, Murat; Türköz, Mevlüt ; Elmalı, Ahmet; Avcı, Semih; Dağhan, Behçet; Halkacı, Hüseyin Selçuk |
2023 | The high potential of industrial robots in the machining process to empower mass customization: Advantages and deficiencies | Gümüş, M.S.; Kalyoncu, M. |
2021 | High temperature solid particle erosion comparison of atmospheric plasma sprayed MCrAlY coatings | Demirci, Musa; Bağcı, Mehmet |
2023 | Impact of tilt angle on the performance of the photovoltaic systems for different row spacing | Aksoy, Muharrem Hilmi ; İspir, Murat; Yeşil, Emin |
2021 | Impact response of nanoparticle reinforced 3D woven spacer/epoxy composites at cryogenic temperatures | Yildirim, Ferhat; Tatar, Ahmet Caner ; Eskizeybek, Volkan; Avcı, Ahmet; Aydın, Mustafa |