| Issue Date | Title | Author(s) |
| 1 | 2022 | A combinatorial study on ZnO-In2O3-SnO2 system: The effects of different postgrowth annealing conditions on optical and electrical properties | Can, Hilal Aybike; Öztürk, Tayfur; Akyıldız, Hasan |
| 2 | 2022 | CuCoO2 Parçacıkları ile Yeni Metal Oksit Kompozitlerin Üretimi ve Kirleticilerin Uzaklaştırılmasında Kullanılması | Dursun, Sami |
| 3 | 2022 | Çözücü ve Isıl İşlem Sürecinin MoS2 İnce Filmlerinin Yapısal Özelliklerine Etkisinin İncelenmesi | Akyol, Mustafa; Kıvrak, Burak |
| 4 | 2022 | DETRIMENTAL EFFECTS OF COMMONLY USED TEXTILE DYES ON THE AQUATIC ENVIRONMENT AND HUMAN HEALTH - A REVIEW | Yıldırım, Özlem Altıntaş ; Bahadır, Mufit; Pehlivan, Erol |
| 5 | 2022 | A dopant-free 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT)-based hole transporting layer for highly stable perovskite solar cells with efficiency over 22% | Kaya, İsmail Cihan ; Özdemir, Resul; Usta, Hakan; Sönmezoğlu, Savaş |
| 6 | 2022 | Eco-Friendly Bleaching of Cotton Fabrics Without Heating Using Direct Process Water in the Presence of Sodium Chlorite and Phosphonate | Dursun, Sami ; Yıldız, Salih Z. |
| 7 | 2022 | Effect of surface finish on the colour anodising of Ti-6Al-4V at various voltages | Kocabaş, Mustafa |
| 8 | 2022 | Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings | Günen, Ali; Lindner, T.; Karakas, M. S. ; Kanca, E.; Toberling, G.; Vogt, S.; Lampke, T. |
| 9 | 2022 | Effect of Y Addition on the Structural Properties and Oxidation Behavior of Fe60Al40-nYn Alloys (n=1, 3, and 5 at.%) | Yıldırım, Mehmet ; Ataş, Mehmet Şahin ; Akdeniz, M. Vedat; Mekhrabov, Amdulla O. |
| 10 | 2022 | Elektrolitik krom kaplamada organik katalizör ilavesinin ve akım yoğunluğunun kaplama özelliklerine etkilerinin incelenmesi | Bayatlı, Aleyna |
| 11 | 2022 | FABRICATION OF THE P-N JUNCTION ULTRAVIOLET PHOTODETECTORS BASED ON METAL OXIDE NANOPARTICLES | Kaya, İsmail Cihan |
| 12 | 2022 | Flash sintering effect on fly ash microstructure | Cetinkaya, Zeynep |
| 13 | 2022 | Gold Leaching from Copper Anode Slime with 1-Butly-3-Methyl Imidazolium Chloride | Topçu, Mehmet Ali; Ruşen, Aydın; Kalem, Volkan ; Küçük, Özkan |
| 14 | 2022 | Green synthesis and characterization of Ag-doped ZnO nanofibers for photodegradation of MB, RhB and MO dye molecules | Ersöz, Eda; Yıldırım, Özlem Altıntaş |
| 15 | 2022 | Intrinsic Organic Semiconductors as Hole Transport Layers in p-i-n Perovskite Solar Cells | Susic, Isidora; Zanoni, Kassio P. S.; Paliwal, Abhyuday; Kaya, İsmail C. ; Hawash, Zafer; Sessolo, Michele; Bolink, Henk J. |
| 16 | 2022 | Investigation of structural and magnetic characteristic of pure and M-doped (M: Fe and Cu) MoS2 thin films | Kıvrak, Burak ; Akyol, Mustafa; Ekicibil, Ahmet |
| 17 | 2022 | Investigation of structural, magnetic and microwave absorption properties of NixCo1-xFe2O4/Ni:ZnO (x:0.0, 0.5, and 1.0) embedded epoxy composites | Kıvrak, Burak ; Tümen, Kutluhan Utku; Karaaslan, Muharrem; Akyol, Mustafa |
| 18 | 2022 | MICROSTRUCTURAL EVOLUTION AND OXIDATION BEHAVIOR OF Fe-4Cr-6Ti FERRITIC ALLOY WITH Fe2Ti LAVES PHASE PRECIPITATES | Demirel, Ahmet; Çetin, Emre Can; Karakuş, Ali; Ataş, Mehmet Şahin ; Yıldırım, Mehmet |
| 19 | 2022 | Ni-FeNi3-Fe3O4 METALİK NANOALAŞIMLARIN HİDROTERMAL YÖNTEMLE SENTEZİ VE KARAKTERİZASYONU | Ataş, Mehmet Şahin ; Altıntaş Yıldırım, Özlem |
| 20 | 2022 | Pack-Boriding of Monel 400: Microstructural Characterization and Boriding Kinetics | Günen, Ali; Keddam, Mourad; Erdoğan, Azmi; Karakaş, Mustafa Serdar |
