| Issue Date | Title | Author(s) |
161 | 2019 | Proposal of a Harmonic Bees Algorithm for Design Optimization of a Gripper Mechanism | Acar, Osman; Kalyoncu, M. ; Hassan, A. |
162 | 2023 | Residual compressive strength of polyamide fiber-reinforced epoxy composites after low-velocity impact | Coşkun, Taner ; Yar, Adem; Demir, Okan ; Şahin, Ömer Sinan |
163 | 2019 | Saf suyun alüminyum-kompozit levhaların yapıştırma bağlantılarındaki naylon 6.6 nanofiber takviyeli yapıştırıcılara etkisi | Tatar, Ahmet Caner |
164 | 2022 | Selectively Reinforced Functionally Graded Composite-like Glass/Carbon Polymer Nanocomposites: Designed for Efficient Bending and Impact Performance | Demir, Okan ; Tatar, Ahmet Caner ; Eskizeybek, Volkan; Avcı, Ahmet |
165 | 2018 | Serbest yüzey ve bir küre art izi arasındaki etkileşimlerin araştırılması | Doğan, Sercan ; Özgören, Muammer; Okbaz, Abdulkerim; Şahin, Beşir; Akıllı, Hüseyin |
166 | 2021 | Simulation and arduino hardware implementation of dc motor control using sliding mode controller | Maarif, A.; Çakan, Abdullah |
167 | 2023 | Solid Particle Erosion Behavior on the Outer Surface of Basalt/Epoxy Composite Pipes Produced by the Filament Winding Technique | Demet, Seyit Mehmet ; Sepetcioğlu, Harun; Bagci, Mehmet |
168 | 2022 | Solid Particle Erosion Wear Behaviors of Recycled PA 3200 GF Powders Produced by Selective Laser Sintering Method in Different Abrasive Environmental Conditions | Bağcı, Mehmet ; Demirci, Musa; Nesimioglu, Baris Samim |
169 | 2021 | Strength and Modal Analysis of Mobile Robot with Klann Walking Mechanism | Kavlak, Koray ; Taner, Y.O. |
170 | 2021 | A study on performance and flow characteristics of single and double H-type Darrieus turbine for a hydro farm application | Yağmur, Sercan ; Köse, Faruk ; Doğan, Sercan |
171 | 2022 | A study on the effect of the roller burnishing process on the axial fatigue performance and surface integrity of AISI 4340 steel | Aydın, Mevlüt ; Türköz, Mevlüt |
172 | 2019 | System identification based inverse kinematics analysis and control of a multi?dof road simulator | Çakan, Abdullah ; Önen, Ü.; Botsalı, F.M. |
173 | 2023 | Techno-Economic Feasibility of Different Photovoltaic Technologies | Aksoy, Muharrem Hilmi ; Ispir, Murat |
174 | 2020 | Tekerlekli askeri araç bileşenlerinin titreşim kaynaklı yorulma analizleri | Gümüş, Mehmet Sefa |
175 | 2023 | Three-point bending fatigue behavior of basalt-carbon-glass/epoxy hybrid composites under saltwater environment | Esleman, Esmael Adem; Önal, Gürol |
176 | 2021 | Time and volume-ratio effect on reusable polybenzoxazole nanofiber oil sorption capacity investigated via machine learning | Oflaz, Kamil; Oflaz, Zarina; Özaytekin, İlkay ; Dinçer, Kevser ; Barstuğan, Rabia |
177 | 2019 | Topology design and modal analysis of a Bracket via FEA | Gülbahçe, E.; Sezgen, H.Ç.; Çakan, Abdullah |
178 | 2021 | Towards Analysis and Optimization for Contact Zone Temperature Changes and Specific Wear Rate of Metal Matrix Composite Materials Produced from Recycled Waste | Güneş, Aydın; Salur, Emin; Aslan, Abdullah; Kuntoğlu, Mustafa; Giasin, Khaled; Pimenov, Danil Yurievich; Şahin, Ömer Sinan |
179 | 2018 | Transient heat transfer in pipes with time periodically changing boundary condition | Altun, A.H.; Ateş, A.; Atmaca, Şükrü Ulaş ; Koçak, Sedat; Bilir, Şefik |
180 | 2020 | Turbulence modeling approaches on unsteady flow structures around a semi-circular cylinder | Yağmur, Sercan ; Doğan, Sercan ; Aksoy, Muharrem Hilmi ; Göktepeli, İlker |