| Issue Date | Title | Author(s) |
41 | 2019 | In situ reduction of chloroauric acid (HAuCl4) for generation of catalytic Au nanoparticle embedded triazine based covalent organic polymer networks | Dursun, Sami ; Yavuz, Emine; Çetinkaya, Zeynep |
42 | 2022 | Intrinsic Organic Semiconductors as Hole Transport Layers in p-i-n Perovskite Solar Cells | Susic, Isidora; Zanoni, Kassio P. S.; Paliwal, Abhyuday; Kaya, İsmail C. ; Hawash, Zafer; Sessolo, Michele; Bolink, Henk J. |
43 | 2023 | Investigation of biochemical properties of flash sintered ZrO2–SnO2 nanofibers | Çetinkaya, Zeynep ; Güneş, Eda; Şavklıyıldız, İlyas |
44 | 2023 | Investigation of photocatalytic activity (under visible light) of ultrathin CZTS films produced in different thicknesses by PLD method | Dursun, Sami ; Sarıipek, Fatma Bayram ; Kılıç, Sümeyye; Gezgin, Serap Yiğit; Gündoğdu, Yasemin; Şükür Kılıç, Hamdi |
45 | 2022 | Investigation of structural and magnetic characteristic of pure and M-doped (M: Fe and Cu) MoS2 thin films | Kıvrak, Burak ; Akyol, Mustafa; Ekicibil, Ahmet |
46 | 2022 | Investigation of structural, magnetic and microwave absorption properties of NixCo1-xFe2O4/Ni:ZnO (x:0.0, 0.5, and 1.0) embedded epoxy composites | Kıvrak, Burak ; Tümen, Kutluhan Utku; Karaaslan, Muharrem; Akyol, Mustafa |
47 | 2023 | The investigation of the effect of sodium chlorite and phosphonic acid catalysts on cotton bleaching process conditions | Yildiz, Salih Zeki; Dursun, Sami |
48 | 2021 | Investigation of the Structural Properties of Age-Hardenable Commercial Aluminum Alloys with Various Zn and Mg Contents | Kaplan, Yusuf; Taşar, Sercan; Yıldırım, Mehmet |
49 | 2022 | MICROSTRUCTURAL EVOLUTION AND OXIDATION BEHAVIOR OF Fe-4Cr-6Ti FERRITIC ALLOY WITH Fe2Ti LAVES PHASE PRECIPITATES | Demirel, Ahmet; Çetin, Emre Can; Karakuş, Ali; Ataş, Mehmet Şahin ; Yıldırım, Mehmet |
50 | 2021 | Microstructural, wear and corrosion characteristics of boronized AISI 904L superaustenitic stainless steel | Çetin, Melik; Günen, Ali; Kalkandelen, Müge; Karakaş, Mustafa Serdar |
51 | 2021 | Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al(0.07)Co(1.26)Cr(1.80)Fe(1.42)Mn1.35Ni1.10 high entropy alloy | Karakaş, Mustafa Serdar ; Günen, Ali; Çarboğa, Cemal; Karaca, Yusuf; Demir, Mehmet; Altınay, Yasemin; Erdoğan, Azmi |
52 | 2020 | Morphological Development, Coarsening, and Oxidation Behavior of Ni-Al-Nb Superalloys | Ataş, Mehmet Şahin ; Yıldırım, Mehmet |
53 | 2021 | N-tipi SnO2 nanofiberlerin üretimi ve fotokatalitik özelliklerinin geliştirilmesi | Dursun, Sami |
54 | 2021 | Ni-Al-X (X = Nb ve Y) esaslı süperalaşımların mikroyapısal özelliklerinin ve oksidasyon davranışlarının incelenmesi | Ataş, Mehmet Şahin |
55 | 2022 | Ni-FeNi3-Fe3O4 METALİK NANOALAŞIMLARIN HİDROTERMAL YÖNTEMLE SENTEZİ VE KARAKTERİZASYONU | Ataş, Mehmet Şahin ; Altıntaş Yıldırım, Özlem |
56 | 2019 | Nickel fluoride as a surface activation agent for electroless nickel coating of anodized AA1050 aluminum alloy | Kocabaş, Mustafa ; Örnek, C.; Curioni, M.; Cansever, N. |
57 | 2019 | ÖSTEMPERLEME SICAKLIK VE SÜRESİNİN ÖSTEMPERLENMİŞ SÜNEK DÖKME DEMİRLERİN MİKRO YAPI VE SERTLİĞİNE ETKİSİ | Öztürk, Emre; Yıldırım, Mehmet |
58 | 2022 | Pack-Boriding of Monel 400: Microstructural Characterization and Boriding Kinetics | Günen, Ali; Keddam, Mourad; Erdoğan, Azmi; Karakaş, Mustafa Serdar |
59 | 2019 | Pack-Boriding of Pure Iron with Powder Mixtures Containing ZrB2 | Çalık, A.; Uçar, N.; Karakaş, M. S. ; Tanış, H. |
60 | 2018 | Photocatalytic activity and dielectric properties of hydrothermally derived tetragonal BaTiO3 nanoparticles using TiO2 nanofibers | Küçük, Öznur; Teber, Seda; Kaya, İsmail Cihan ; Akyıldız, Hasan ; Kalem, Volkan |