| Issue Date | Title | Author(s) |
| 41 | 2022 | Dairesel labirent savakların hidrolik özellikleri, deneysel tasarımı ve nümerik modellenmesi | Yıldız, Ali |
| 42 | 2021 | Damage analysis of Golyazi Apartments building failed under axial loads: A case study in Konya, Turkey | Nakipoğlu, Abdulhamit ; Ünal, Alptuğ ; Kamanlı, Mehmet |
| 43 | 2020 | Damages on prefabricated concrete dapped-end purlins due to snow loads and a novel reinforcement detail | Aksoylu, Ceyhun ; Özkılıç, Yasin Onuralp; Arslan, Musa Hakan |
| 44 | 2022 | DEPREM ETKİLERİNİN BETONARME ÇERÇEVELER İLE BAĞ KİRİŞLİ BETONARME PERDELER TARAFINDAN BİRLİKTE KARŞILANDIĞI BİNALARDA BAĞ KİRİŞİ MODELLERİNİN YAPI PERFORMANSINA ETKİSİ | Yüksel, S. Bahadır ; Özer, Ömer |
| 45 | 2020 | DEPREM ETKİLERİNİN BETONARME ÇERÇEVELER İLE BOŞLUKLU BETONARME PERDELER TARAFINDAN BİRLİKTE KARŞILANDIĞI YÜKSEK BİNALARIN ANALİZ SONUÇLARININ TBDY (2018) VE DBYBHY (2007) ’YE GÖRE KARŞILAŞTIRILMASI | Özer, Ömer; Yüksel, S. Bahadır |
| 46 | 2023 | Detection of damages caused by earthquake and reinforcement corrosion in RC buildings with Deep Transfer Learning | Dogan, Gamze ; Arslan, Musa Hakan ; Ilki, Alper |
| 47 | 2020 | DETERMINATION OF CHANGE POINTS AND TREND ANALYSIS OF ANNUAL TEMPERATURE DATA IN KONYA CLOSED BASIN (TURKEY) | Köyceğiz, Cihangir ; Büyükyıldız, Meral |
| 48 | 2020 | Determination of damage levels of RC columns with a smart system oriented method | Doğan, Gamze ; Arslan, Musa Hakan ; Baykan, Ömer Kaan |
| 49 | 2021 | Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling | Yıldız, Ali ; Martı, Ali İhsan ; Göğüs, Mustafa |
| 50 | 2019 | Determination of moment, shear and ductility capacities of spiral columns using an artificial neural network | Koçer, Mustafa ; Öztürk, Murat ; Arslan, M. Hakan |
| 51 | 2022 | Determination of Punching Shear Capacity of Concrete Slabs Reinforced with FRP Bars Using Machine Learning | Doğan, Gamze ; Arslan, Musa Hakan |
| 52 | 2022 | Effect and optimization of incorporation of nano-SiO2 into cement-based materials – a review | Al-Hagri, Mohammed Gamal; Döndüren, Mahmud Sami |
| 53 | 2022 | Effect of column cross section and concrete compressive strength on the resistance of RC columns subjected to axial loads and loads created by creep | Nakipoğlu, Abdulhamit ; Al-Hagri, Mohammed Gamal; Döndüren, Mahmud Sami |
| 54 | 2020 | Effect of configuration of shear walls at story plan to seismic behavior of high-rise reinforced concrete buildings | Çöğürcü, Mustafa Tolga ; Uzun, Mehmet |
| 55 | 2020 | Effect of confining reinforcement and axial load level on curvature ductility and effective stiffness of reinforced concrete columns | Foroughi, Saeid; Jamal, Rohullah; Yüksel, S. Bahadır |
| 56 | 2021 | The effect of coupled beam models in buildings where earthquake loads are fully resisted by r/c shear walls on structural performance | Özer, Ömer; Yüksel, S. Bahadır |
| 57 | 2021 | EFFECT OF CURING REGIMES ON THE MECHANICAL AND FRESH PROPERTIES OF STEEL FIBER-REINFORCED CONCRETE | Öztürk, Oğuzhan ; Yenidünya, Eren; Keskin, Ülkü Sultan |
| 58 | 2022 | The effect of different viscosity modifying additives on the mechanical and flow properties of self-compacting mortars | Türk, Furkan ; Saydan, Murat ; Keskin, Ülkü Sultan |
| 59 | 2020 | Effect of Polyolefin Modified Bitumen on Marshall Stability | Akmaz, M. Mevlüt ; Çelik, Osman Nuri |
| 60 | 2021 | Effect of pyrolysis char produced from co-pyrolysis of waste sycamore leaves and plastic cups on bitumen viscosity and high temperature performance grade | Atasağun, Neslihan |
