| Issue Date | Title | Author(s) |
| 141 | 2021 | Metaheuristics-based Pre-Design Guide for Cantilever Retaining Walls | Uray, Esra; Tan, Özcan; Çarbaş, Serdar; Erkan, İbrahim Hakkı |
| 142 | 2020 | Modeling of broad crested weirs by using dynamic similarity and CFD | Yıldız, Ali ; Yarbaşı, Elif Göknur; Yarar, Alpaslan ; Martı, Ali İhsan |
| 143 | 2023 | Moment-Curvature and Effective Section Stiffness of Reinforced Concrete Beams | Foroughi, Saeid; Yüksel, S. Bahadır |
| 144 | 2021 | Multifunctional behavior of CNT- and CB-based composite beams | Öztürk, Oğuzhan |
| 145 | 2022 | Multifunctional behavior of composite beams incorporating hybridized carbon-based materials under cyclic loadings | Öztürk, Oğuzhan ; Koçer, Mustafa ; Ünal, Alptuğ |
| 146 | 2020 | Nano-tailored multi-functional cementitious composites | Öztürk, Oğuzhan ; Yıldırım, Gürkan; Keskin, Ülkü Sultan ; Siad, Hocine; Şahmaran, Mustafa |
| 147 | 2022 | A NEW APPROACH FOR DETERMINING THE CURVATURE DUCTILITY OF REINFORCED CONCRETE BEAMS | Foroughi, Saeid; Yüksel, S. Bahadır |
| 148 | 2023 | New Metric for the Calculation of Sensitivity Analysis Index of Flexible Pavement Using Mechanistic-Empirical Approach, Turkey-Case Study | Eyada, Saadoon Obaid Eyada; Çelik, Osman Nuri ; Abdulla, Nibras Y. |
| 149 | 2022 | Non-linear displacement and deformation damage limits of reinforced concrete circular columns by analytical observations according to TBSC 2018 | Foroughi, Saeid; Yüksel, S. Bahadır |
| 150 | 2024 | A novel approach to warm mix asphalt additive production from polypropylene waste plastic via pyrolysis | Köse, Hüseyin ; Çelik, Osman Nuri ; Arslan, Deniz |
| 151 | 2023 | A novel strengthening technique against short column failure in RC structures: SIFCON panels | Kayacik, Fatih; Ünal, Alptuğ ; Doğan, Gamze |
| 152 | 2023 | Numerical and analytical investigation of parameters influencing the behavior of shear beams strengthened by CFRP wrapping | Aksoylu, Ceyhun ; Özkılıç, Yasin Onuralp; Yazman, Şakir; Alsdudi, Mohammed; Gemi, Lokman; Arslan, Musa Hakan |
| 153 | 2020 | Numerical and ANFIS modeling of flow over an ogee-crested spillway | Yıldız, Ali ; Yarar, Alpaslan ; Kumcu, S. Yurdagül; Martı, Ali İhsan |
| 154 | 2021 | Numerical and experimental modelling of flow at Tyrolean weirs | Yıldız, Ali ; Martı, Ali İhsan ; Göğüs, Mustafa |
| 155 | 2021 | Numerical evaluation of effects of shear span, stirrup spacing and angle of stirrup on reinforced concrete beam behaviour | Özkılıç, Yasin Onuralp; Aksoylu, Ceyhun ; Arslan, Musa Hakan |
| 156 | 2022 | Numerical evaluation of reinforced concrete slabs with fixed support under impact load | Şengel, H. Selim; Yilmaz, Tolga |
| 157 | 2021 | Numerical investigation of the parameters influencing the behavior of dapped end prefabricated concrete purlins with and without CFRP strengthening | Özkılıç, Yasin Onuralp; Yazman, Şakir; Aksoylu, Ceyhun ; Arslan, Musa Hakan ; Gemi, Lokman |
| 158 | 2021 | Numerical study on the response of composite shear walls with steel sheets under cyclic loading | Olabi, M. Nadir; Çağlar, Naci; Kısa, M. Haşim; Yüksel, S. Bahadır |
| 159 | 2020 | OPTIMIZATION OF WATER DISTRIBUTION NETWORKS USING ARTIFICIAL BEE COLONY ALGORITHM | Yılmaz, Umut Volkan; Büyükyıldız, Meral ; Baykan, Ömer Kaan |
| 160 | 2023 | Optimizing installation parameters of DM columns in clay using Taguchi method | Yenginar, Yavuz; Olgun, Murat |
