| Issue Date | Title | Author(s) |
41 | 2019 | Highly efficient photocatalytic activity of stable manganese-doped zinc oxide (Mn:ZnO) nanofibers via electrospinning method | Baylan, Elif; Altıntaş Yıldırım, Özlem |
42 | 2019 | HİDROTERMAL YÖNTEMLE SENTEZLENEN ÇİNKO STANAT (Zn2SnO4) NANOPARÇACIKLARIN FOTOKATALİTİK PERFORMANSLARININ İNCELENMESİ | Baylan, Elif; Culu, Ayşe; Yıldırım, Mehmet Serdar; Öztürk, Teoman; Sönmezoğlu, Savaş; Altıntaş Yıldırım, Özlem |
43 | 2019 | Hydrothermal synthesis of pseudocubic BaTiO3 nanoparticles using TiO2 nanofibers: Study on photocatalytic and dielectric properties | Kaya, Ismail Cihan ; Kalem, Volkan ; Akyıldız, Hasan |
44 | 2020 | Hydrothermal/electrospinning synthesis of CuO plate-like particles/TiO2 fibers heterostructures for high-efficiency photocatalytic degradation of organic dyes and phenolic pollutants | Çınar, Büşra; Kerimoğlu, İklim; Tönbül, Beyza; Demirbüken, Atakan; Dursun, Sami ; Kaya, İsmail Cihan ; Akyıldız, Hasan |
45 | 2020 | Hydrothermally synthesized UV light active zinc stannate:tin oxide (ZTO: SnO2) nanocomposite photocatalysts for photocatalytic applications | Keles, Elif; Yıldırım, Mehmet ; Öztürk, Teoman; Altıntaş Yıldırım, Özlem |
46 | 2020 | Improvement of mechanical properties by means of titanium alloying to steel teeth used in the excavator | Keleş, Ali; Yıldırım, Mehmet |
47 | 2019 | In situ reduction of chloroauric acid (HAuCl4) for generation of catalytic Au nanoparticle embedded triazine based covalent organic polymer networks | Dursun, Sami ; Yavuz, Emine; Çetinkaya, Zeynep |
48 | 2022 | Intrinsic Organic Semiconductors as Hole Transport Layers in p-i-n Perovskite Solar Cells | Susic, Isidora; Zanoni, Kassio P. S.; Paliwal, Abhyuday; Kaya, İsmail C. ; Hawash, Zafer; Sessolo, Michele; Bolink, Henk J. |
49 | 2023 | Investigation of biochemical properties of flash sintered ZrO2–SnO2 nanofibers | Çetinkaya, Zeynep ; Güneş, Eda; Şavklıyıldız, İlyas |
50 | 2023 | Investigation of photocatalytic activity (under visible light) of ultrathin CZTS films produced in different thicknesses by PLD method | Dursun, Sami ; Sarıipek, Fatma Bayram ; Kılıç, Sümeyye; Gezgin, Serap Yiğit; Gündoğdu, Yasemin; Şükür Kılıç, Hamdi |
51 | 2020 | INVESTIGATION OF POROUS ANODIC FILM FORMATION ON AA1050 BY ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY | Danışman, M.; Kocabaş, Mustafa ; Curioni, M.; Cansever, N. |
52 | 2022 | Investigation of structural and magnetic characteristic of pure and M-doped (M: Fe and Cu) MoS2 thin films | Kıvrak, Burak ; Akyol, Mustafa; Ekicibil, Ahmet |
53 | 2022 | Investigation of structural, magnetic and microwave absorption properties of NixCo1-xFe2O4/Ni:ZnO (x:0.0, 0.5, and 1.0) embedded epoxy composites | Kıvrak, Burak ; Tümen, Kutluhan Utku; Karaaslan, Muharrem; Akyol, Mustafa |
54 | 2023 | The investigation of the effect of sodium chlorite and phosphonic acid catalysts on cotton bleaching process conditions | Yildiz, Salih Zeki; Dursun, Sami |
55 | 2021 | Investigation of the Structural Properties of Age-Hardenable Commercial Aluminum Alloys with Various Zn and Mg Contents | Kaplan, Yusuf; Taşar, Sercan; Yıldırım, Mehmet |
56 | 2019 | Investigation on Dielectric Permittivity of PZT Manufactured by Electric Field Assisted Sintering | Şavklıyıldız, İlyas ; Okur, Çiğdem |
57 | 2024 | An investigation on utilization of doğanhisar/konya clays in glazed porcelain tile bodies | Kalem, Volkan ; Sarıkaya, Gülay |
58 | 2022 | MICROSTRUCTURAL EVOLUTION AND OXIDATION BEHAVIOR OF Fe-4Cr-6Ti FERRITIC ALLOY WITH Fe2Ti LAVES PHASE PRECIPITATES | Demirel, Ahmet; Çetin, Emre Can; Karakuş, Ali; Ataş, Mehmet Şahin ; Yıldırım, Mehmet |
59 | 2021 | Microstructural, wear and corrosion characteristics of boronized AISI 904L superaustenitic stainless steel | Çetin, Melik; Günen, Ali; Kalkandelen, Müge; Karakaş, Mustafa Serdar |
60 | 2021 | Microstructure, phase relationships and microhardness of Fe60Al40-nHfn alloys (n=1, 3, and 5 at.%) | Yıldırım, Mehmet ; Çetinbakış, Neşe; Culu, Ayşe; Akdeniz, M. Vedat; Mekhrabov, Amdulla O. |