| Issue Date | Title | Author(s) |
| 1 | 2022 | The aerodynamic effects of blade pitch angle on small horizontal axis wind turbines | Kaya, Mehmet Numan; Uzol, Oguz; Ingham, Derek; Köse, Faruk ; Büyükzeren, Rıza |
| 2 | 2021 | Aerodynamic Optimization of a Swept Horizontal Axis Wind Turbine Blade | Kaya, Mehmet Numan; Köse, Faruk ; Uzol, Oğuz; Ingham, Derek; Ma, Lin; Pourkashanian, Mohamed |
| 3 | 2023 | Combined effect of fiber hybridization and matrix modification on mechanical properties of polymer composites | Demir, Okan ; Yar, Adem; Eskizeybek, Volkan; Avci, Ahmet |
| 4 | 2022 | Design of the composite hydraulic cylinder with geodesic dome trajectory: A numerical study | Coşkun, Taner ; Şahin, Ömer Sinan |
| 5 | 2020 | Design, manufacture and thermal analysis of a single pass solar air collector at different mass flow rates | Darıcı, Selçuk |
| 6 | 2022 | The effect of halloysite nanotube modification on wear behavior of carbon-aramid fiber reinforced hybrid nanocomposites | Çetin, Mehmet Emin; Baştosun, Yusuf; Tatar, Ahmet Caner ; Çetin, Muhammet Hüseyin ; Demir, Okan ; Önal, Gürol ; Avcı, Ahmet |
| 7 | 2022 | Effect of oil pressure upon filament wound basalt/glass fibers hybrid polymer based composite pipes subjected to low velocity impact | Demirci, Mehmet Turan; Şahin, Ömer Sinan |
| 8 | 2022 | Experimental investigation of axial compression behavior after low velocity impact of glass fiber reinforced filament wound pipes with different diameter | Gemi, Dilek Soylu; Şahin, Ömer Sinan ; Gemi, Lokman |
| 9 | 2021 | Experimental study of a micro-scale sloped solar chimney power plant | Güzel, Muhammed Hüseyin ; Ünal Ercan, Hatice ; Köse, Faruk |
| 10 | 2023 | Investigation of effects on turbulent heat transfer of twisted wavy tape elements in the tube | Altun, Aziz Hakan; Örs, Soner; Dogan, Sercan |
| 11 | 2020 | Investigation of Heat Transfer Augmentation between the Ribbed Plates via Taguchi Approach and Computational Fluid Dynamics | Göktepeli, İlker ; Atmaca, Şükrü Ulaş ; Çakan, Abdullah |
| 12 | 2021 | Investigation of interaction of extreme pressure additive, load and sliding speed parameters with silver nano-particles in wear environment | Ahmaida, Yousef Alamin A.; Korkmaz, Şeyma; Kılınçarslan, Sena Kabave; Şirvan, Onur Can ; Çetin, Muhammet Hüseyin |
| 13 | 2022 | Investigation on the cost-effective optimal dimensions of a solar chimney with the Bees Algorithm | Ünal, Recep Emre ; Güzel, Muhammed Hüseyin ; Sen, Muhammed Arif ; Köse, Faruk ; Kalyoncu, Mete |
| 14 | 2022 | Optimization of Electricity Generation Parameters with Microbial Fuel Cell Using the Response Surface Method | Neşeli, Süleyman; Dinçer, Kevser ; Taşdemir, Şakir; Hayder, Mustafa Akram |
| 15 | 2023 | Three-point bending fatigue behavior of basalt-carbon-glass/epoxy hybrid composites under saltwater environment | Esleman, Esmael Adem; Önal, Gürol |
| 16 | 2024 | Understanding the effects of machinability properties of Incoloy 800 superalloy under different machining conditions using artificial intelligence methods | Şap, E.; Usca, Ü.A.; Şap, S.; Polat, H.; Giasin, K.; Kalyoncu, M. |
