| Issue Date | Title | Author(s) |
1 | 2022 | The aerodynamic effects of blade pitch angle on small horizontal axis wind turbines | Kaya, Mehmet Numan; Uzol, Oguz; Ingham, Derek; Köse, Faruk ; Büyükzeren, Rıza |
2 | 2022 | APPLICATION OF THE BEES ALGORTIHM UPON HYDRAULIC CYLINDER DESIGN AND OPTIMIZATION | Sözen, Betül; Kalyoncu, Mete ; Şahin, Ömer Sinan |
3 | 2021 | ARI ALGORİTMASI (AA) VE PARÇACIK SÜRÜ OPTİMİZASYONU (PSO) KULLANARAK ÇEYREK ARAÇ MODELİ TASARIM PARAMETRELERİNİN BELİRLENMESİ | Eser, Onur; Çakan, Abdullah ; Kalyoncu, Mete ; Botsali, Fatih |
4 | 2023 | Comparison of mechanical properties of the Type 1 and Type 2 composite hydraulic cylinder designs: A numerical study | Coşkun, Taner ; Sahin, Omer Sinan |
5 | 2022 | Design of a Three Degrees of Freedom (3R) Drawing Robot and Optimal Trajectory Control Using The Bees Algorithm | Çinar, Muhammet Ali; Kalyoncu, Mete ; Sen, Muhammed Arif |
6 | 2022 | Design of the composite hydraulic cylinder with geodesic dome trajectory: A numerical study | Coşkun, Taner ; Şahin, Ömer Sinan |
7 | 2023 | Effects of geodesic dome trajectories on the specific strength of composite overwrapped pressure vessels: FE modelling | Coşkun, Taner ; Şahin, Ömer Sinan |
8 | 2019 | EXPERIMENTAL INVESTIGATION OF SOLAR/WIND HYBRID SYSTEM FOR IRRIGATION IN KONYA, TURKEY | Köse, Faruk ; Aksoy, Muharrem Hilmi ; Özgören, Muammer B. |
9 | 2019 | Experimental study and analysis of machinability characteristics of metal matrix composites during drilling | Salur, Emin; Aslan, Abdullah; Kuntoğlu, Mustafa; Güneş, Aydın; Şahin, Ömer Sinan |
10 | 2023 | Formability improvement in Ti-6Al-4 V sheet at room temperature by pulsating hydraulic bulging: experimental and numerical investigations | Öztürk, Osman ; Korkmaz, Habip G.; Ataş, Gürkan; Aydın, Mevlut; Türkoz, Mevlut; Toros, Serkan; Dilmeç, Murat |
11 | 2022 | Fuzzy-based modeling and speed optimization of a centrifugal blood pump using a modified and constrained Bees algorithm | İncebay, Ömer ; Önder, Ahmet ; Arif, Şen, Muhammed; Yapıcı, Rafet ; Kalyoncu, Mete |
12 | 2021 | Heuristic optimization of impeller sidewall gaps-based on the bees algorithm for a centrifugal blood pump by CFD | Önder, Ahmet ; İncebay, Ömer ; Şen, Muhammed Arif ; Yapıcı, Rafet ; Kalyoncu, Mete |
13 | 2020 | Investigation of Heat Transfer Augmentation between the Ribbed Plates via Taguchi Approach and Computational Fluid Dynamics | Göktepeli, İlker ; Atmaca, Şükrü Ulaş ; Çakan, Abdullah |
14 | 2021 | Investigation of interaction of extreme pressure additive, load and sliding speed parameters with silver nano-particles in wear environment | Ahmaida, Yousef Alamin A.; Korkmaz, Şeyma; Kılınçarslan, Sena Kabave; Şirvan, Onur Can ; Çetin, Muhammet Hüseyin |
15 | 2020 | Investigation of the effect of surface crack on low-velocity impact response in hybrid laminated composite plates | Güneş, Aydın; Şahin, Ömer Sinan |
16 | 2022 | Investigation on the cost-effective optimal dimensions of a solar chimney with the Bees Algorithm | Ünal, Recep Emre ; Güzel, Muhammed Hüseyin ; Sen, Muhammed Arif ; Köse, Faruk ; Kalyoncu, Mete |
17 | 2020 | A Literature Review on Walking Strategies of Legged Robots | Bakırcıoğlu, Veli; Kalyoncu, Mete |
18 | 2021 | Measuring curvature of trajectory traced by coupler of an optimal four-link spherical mechanism | Acar, Osman; Sağlam, Hacı; Şaka, Ziya |
19 | 2021 | Meta-Heuristic Tuning of the LQR Weighting Matrices Using Various Objective Functions on an Experimental Flexible Arm Under the Effects of Disturbance | Bilgiç, Hasan Hüseyin; Şen, Muhammed Arif ; Yapıcı, Ahmet; Yavuz, Hakan; Kalyoncu, Mete |
20 | 2021 | A Novel Design of Interval Type-2 Neuro-Fuzzy Controller for Flexible Structure | Tınkır, Mustafa; Kalyoncu, Mete ; Sezgen, Haşmet Çağrı |