| Issue Date | Title | Author(s) |
| 1 | 2022 | The aerodynamic effects of blade pitch angle on small horizontal axis wind turbines | Kaya, Mehmet Numan; Uzol, Oguz; Ingham, Derek; Köse, Faruk ; Büyükzeren, Rıza |
| 2 | 2020 | Ağır Vasıta Hava Kompresörü Piston Segmanı Aşınması Durumlarında K-En Yakın Komşu Algoritmasının Sınıflandırma Performansının İncelenmesi | Gül, Emre; Kalyoncu, Mete |
| 3 | 2020 | AISI 304 PASLANMAZ ÇELİK SACIN HİDROMEKANİK DERİN ÇEKİLMESİ | Türköz, Mevlüt |
| 4 | 2021 | Alternative System Design for High Temperature Solid Particle Erosion Wear Problem | Demirci, Musa; Bağcı, Mehmet |
| 5 | 2023 | Analysis of the azimuth angles of a medium-scale PV system in non-ideal positions for roof application | İspir, Murat; Bakırhan, Mahmud; Aksoy, Muharrem Hilmi |
| 6 | 2022 | APPLICATION OF THE BEES ALGORTIHM UPON HYDRAULIC CYLINDER DESIGN AND OPTIMIZATION | Sözen, Betül; Kalyoncu, Mete ; Şahin, Ömer Sinan |
| 7 | 2021 | ARI ALGORİTMASI (AA) VE PARÇACIK SÜRÜ OPTİMİZASYONU (PSO) KULLANARAK ÇEYREK ARAÇ MODELİ TASARIM PARAMETRELERİNİN BELİRLENMESİ | Eser, Onur; Çakan, Abdullah ; Kalyoncu, Mete ; Botsali, Fatih |
| 8 | 2022 | Assessment of Wind Energy Potential and Current Usage status in Turkey and in the World | Kose, Suleyman; Köse, Faruk |
| 9 | 2022 | Backstepping Sliding Mode Control for Inverted Pendulum System with Disturbance and Parameter Uncertainty | Ma'arif, A.; Vera, M.A.M.; Mahmoud, M.S.; Ladaci, S.; Çakan, Abdullah ; Parada, J.N. |
| 10 | 2022 | Behaviors of Removing Diesel Oil from Water with PS/Ti4O7 Composite Nanofibers: Modeling Diesel Oil Sorption Capacity for Tap Water and Investigation of the Effects of pH on Sorption at Different Temperatures for Times | Dinçer, Kevser ; Özaytekin, İlkay |
| 11 | 2021 | Bluetooth Controlled Hexapod Robot Design | Kavlak, Koray ; Kartal, İbrahim Ali |
| 12 | 2023 | Cascade Proportional Derivative Controller For A Flexible Link Robot Manipulator Using The Bees Algorithm | Çakan, Abdullah ; Kalyoncu, Mete ; Gümüş, Mehmet Sefa |
| 13 | 2021 | Comparative Performance Analysis of Combined Power Systems Trilateral Cycle-Organic Rankine Cycle (TLC-ORC) and Organic Rankine Cycle Organic Rankine Cycle (ORC-ORC) | Bilir Sağ, Nagihan ; Özçelik, Mehmet |
| 14 | 2020 | Comparative study on the performances of solar air collectors with trapezoidal corrugated and flat absorber plates | Darıcı, Selçuk ; Kılıç, Anıl |
| 15 | 2023 | Comparison of mechanical properties of the Type 1 and Type 2 composite hydraulic cylinder designs: A numerical study | Coşkun, Taner ; Sahin, Omer Sinan |
| 16 | 2023 | A comprehensive experimental study of enhanced solid particle erosive resistance on the inner/outer surface of graphene nanoplatelets modified basalt/epoxy composite pipe | Sepetcioğlu, Harun; Demet, Seyit Mehmet ; Bağcı, Mehmet |
| 17 | 2021 | Computational Study on the Effect of the Staggered Ribs on Heat Transfer Phenomena Between the Horizontal Plates | Göktepeli, İlker ; Atmaca, Ş. Ulaş |
| 18 | 2019 | Control of the flow past a sphere near a flat wall using passive jet | Okbaz, Abdulkerim; Özgören, Muammer; Doğan, Sercan ; Canpolat, Çetin; Akıllı, Hüseyin; Şahin, Beşir |
| 19 | 2022 | Deneysel Tasarım Yöntemleri İle Bir Santrifüj Pompa Çarkında Dengeleme Deliği Tasarım Optimizasyonu | Koçak, Saim ; Sefacı, Selahattin; Babayiğit, Osman |
| 20 | 2022 | Design of a Three Degrees of Freedom (3R) Drawing Robot and Optimal Trajectory Control Using The Bees Algorithm | Çinar, Muhammet Ali; Kalyoncu, Mete ; Sen, Muhammed Arif |
