| Issue Date | Title | Author(s) |
| 1 | 10-Dec-2021 | Afetler Sonrasında Üç Boyutlu Yazıcı İle Yapılacak Olan Geçici Beton Konutlarda Kullanılacak Malzeme Karışımlarının Optimizasyon Metodu | Arslan, Musa Hakan |
| 2 | 2021 | AMBIENT VIBRATION ANALYSIS of an INDUSTRIAL BUILDING | Kartal, Hüseyin; Dere, Yunus; Arslan, Musa Hakan |
| 3 | 2021 | An Analysis According to Regulation of DBYBHY 2007 and TBDY 2018 By Equivalent Earthquake Load Method of A Reinforced Concrete Building | Döndüren, Mahmud Sami ; Hava, Şeyda; Ecemiş, Ali Serdar |
| 4 | 2021 | Application of an artificial neural network for predicting compressive and flexural strength of basalt fiber added lightweight | Çalış, Gökhan; Yıldızel, Sadık Alper; Keskin, Ülkü Sultan |
| 5 | 2021 | Autogenous Self-healing Assessment of 1-Year-Old Cementitious Composites | Yıldırım, Gürkan; Ulugöl, H.; Öztürk, Oğuzhan ; Şahmaran, M. |
| 6 | 2021 | Buildings Damages after Elazig, Turkey Earthquake on January 24, 2020 | Doğan, Gamze ; Ecemiş, Ali Serdar; Korkmaz, Serra Zerrin ; Arslan, Musa Hakan ; Korkmaz, Hasan Hüsnü |
| 7 | 2021 | Cladophora'dan elde edilen nanoselüloz liflerin kendiliğinden yerleşen harçlarda viskozite düzenleyici katkı olarak kullanılabilirliğinin incelenmesi | Türk, Furkan |
| 8 | 2021 | A comparative study on the rapid seismic evaluation methods of reinforced concrete buildings | Doğan, Talha Polat; Kızılkula, T.; Mohammadi, M.; Erkan, I. H. ; Kabaş, H. Tekeli; Arslan, M. H. |
| 9 | 2021 | Comparison of performance analysis of a moment resisting framed structure according to tbdy 2018 and asce 41-17 | Jamal, Rohullah; Yüksel, Süleyman Bahadır |
| 10 | 2021 | Comparison of the effect of foundation analysis methods on structural analysis results of tall buildings | Özer, Ömer; Yüksel, S. Bahadır |
| 11 | 2021 | Çekme Donatılı olan Betonarme Kirişlerin Şekil Değiştirme Esaslı Hasar Sınırlarının Araştırılması | Jamal, Rohullah; Yüksel, S. Bahadır |
| 12 | 2021 | Damage analysis of Golyazi Apartments building failed under axial loads: A case study in Konya, Turkey | Nakipoğlu, Abdulhamit ; Ünal, Alptuğ ; Kamanlı, Mehmet |
| 13 | 30-Dec-2021 | Dayanma Duvarlarının Optimum Tasarımlarında Kullanılan Sezgisel Algoritmaların İyileştirme Yöntemi | Olgun, Murat ; Uyar, Esra; Çarbaş, Serdar |
| 14 | 2021 | Determination of Autogenous Self-healing Capability of Cementitious Composites Through Non-destructive Testing | Yıldırım, Gürkan; Öztürk, Oğuzhan ; Ulugöl, H.; Hatem, M.; Şahmaran, Mustafa |
| 15 | 2021 | Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling | Yıldız, Ali ; Martı, Ali İhsan ; Göğüs, Mustafa |
| 16 | 2021 | Effect of Binary-Use Mineral Admixtures for the Advanced Autogenous Self-healing Behavior of Fiber-Reinforced Cementitious Composites | Öztürk, Oğuzhan ; Roig-Flores, M. |
| 17 | 2021 | The effect of coupled beam models in buildings where earthquake loads are fully resisted by r/c shear walls on structural performance | Özer, Ömer; Yüksel, S. Bahadır |
| 18 | 2021 | EFFECT OF CURING REGIMES ON THE MECHANICAL AND FRESH PROPERTIES OF STEEL FIBER-REINFORCED CONCRETE | Öztürk, Oğuzhan ; Yenidünya, Eren; Keskin, Ülkü Sultan |
| 19 | 2021 | Effect of pyrolysis char produced from co-pyrolysis of waste sycamore leaves and plastic cups on bitumen viscosity and high temperature performance grade | Atasağun, Neslihan |
| 20 | 2021 | Effect of Stirrup Spacing and Polypropylene Fiber Ratio on Behavior of Reinforced Concrete Beams | Ünal, Alptuğ ; Cengiz, Salih ; Kamanlı, Mehmet |
