Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/1201
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorCeyhan, Ayhan Abdullah-
dc.contributor.advisorŞahin, Ömer-
dc.contributor.authorReşitoğlu, Aylin-
dc.date.accessioned2021-12-13T10:34:51Z-
dc.date.available2021-12-13T10:34:51Z-
dc.date.issued2021-
dc.identifier.urihttps://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=wf-FPgY-5qjHEzEoOgvMswr6vOqIMQzCv6pyxNab3LLkR1e4UXw7VEOP7WF1JQQP-
dc.identifier.urihttps://hdl.handle.net/20.500.13091/1201-
dc.description.abstractKristalizasyon ortamında bulunan safsızlıklar, metastabil bölge genişliği, indüksiyon zamanı, kristal büyüme hızı, nükleasyon hızı, nem çekme özelliği, kristal habiti, aglomerasyon ve akıcılık özelliklerini etkilemektedir. Metastabil bölge genişliği, endüstriyel kristalizasyon için kilit öneme sahiptir. Bu sebeple safsızlıkların metastabil bölge genişliği üzerine etkisinin belirlenmesi gerekmektedir. Borik asit bor bileşiklerinin üretiminde kullanılan temel reaktiflerden birisidir. Borik asidin kristal özellikleri ürün kalitesine doğrudan etki etmektedir. Bu çalışmada borik asidin metastabil bölge genişliği üzerine Al3+, Zn2+ ve Pb2+ safsızlıklarının etkisi metastabil bölge ölçüm sisteminde incelenmiştir. Saf çözeltiye kıyasla, 10 ppm Zn2+ varlığında metastabil bölge genişliği artmaktadır. Ayrıca, artan Zn2+ konsantrasyonu ile metastabil bölge genişliği daralmaktadır. 10 ppm Al3+ konsantrasyonu için metastabil bölge genişliği artarken, yüksek Al3+ konsantrasyonlarında metastabil bölge genişliği üzerine olan etki sınırlı seviyede kalmaktadır. 25-75 ppm konsantrasyon aralığındaki Pb2+ katkısı, metastabil bölge genişliğini artırmaktadır. 100 ppm Pb2+ katkısı varlığında metastabil bölge genişliği saf çözelti ile aynıdır. Katkısız ve katkılı durumda borik asidin çözünme davranışı endotermik yapıdadır. Katkısız borik asit çözeltisinin bekleme zamanı 50-60 dk. aralığındadır. Yüksek aşırı doygunluk değerleri için 20 dk'ya kadar düşmektedir. 100 ppm Zn2+ varlığında bekleme zamanı, saf ortama kıyasla iki kat artış göstermektedir. 500 ppm Zn2+ varlığında bekleme zamanı düşük değerde de olsa artmaktadır. 1000 ppm Zn2+ varlığında, saf ortama kıyasla, düşük aşırı doygunluk değerlerinde bekleme zamanı yüksek iken, yüksek aşırı doygunluk değerlerinde bekleme zamanı düşük değerdedir. Saf borik asit çözeltisi için, homojen nükleasyonda, nüklei oluşum için gerekli hacim enerjisi artan aşırı doygunluk ile birlikte azalmaktadır. Ayrıca, heterojen nükleasyon için de artan aşırı doygunluk değeri için azalmaktadır. Aynı aşırı doygunluk değerleri için, saf çözeltiye kıyasla, 100 ve 500 ppm Zn2+ katkıları için homojen nükleasyon durumunda, gerekli hacim oluşum enerjisi yüksektir. 1000 ppm Zn2+ varlığında, düşük aşırı doygunluk değerleri için saf çözeltiye yakın değerlerde iken, yüksek aşırı doygunluk değerlerinde düşük değerdedir. Aynı aşırı doygunluk değerleri için, 1000 ve 500 ppm Zn2+ katkısı için nükleasyon hızları, saf çözeltiye kıyasla düşük değerdedir.en_US
dc.description.abstractImpurities in the crystallization medium affect the metastable zone width, induction time, crystal growth rate, nucleation rate, hygroscopic properties, crystal habit, agglomeration and flowability. The metastable zone width is key to industrial crystallization. Therefore, the effect of impurities on the metastable zone width should be determined. Boric acid is one of the main reagents used in the production of boron compounds. The crystal properties of boric acid directly affect the product quality. In this study, the effect of Al3+, Zn2+ and Pb2+ impurities on the metastable zone width of boric acid has been examined in the metastable zone width measurement system. In comparison with pure solution, the metastable zone width increased with Zn2+ additive at 10 ppm concentration. Also, with increasing Zn2+ concentration, metastable zone width narrowed. For 10 ppm Al3+ concentration, metastable zone width narrower, while the effect of increasing Al3+ concentration upon the metastable zone width more limited. At the presence Pb2+ additive at 25-75 ppm concentration, metastable zone width increased. for 100 ppm Pb2+ addition, metastable zone width values are about the same to the pure solution. For the pure and additive-doped solution, the dissolution of boric acid in aqueous solution is in the endothermic structure. The induction time of the pure boric acid solution is 50-60 minutes at low supersaturation values. it drops up to 20 minutes for high supersaturation values. In the presence of 100 ppm Zn2+ additive, the induction time increases more than twice as compared to the pure solution. In the presence of 500 ppm Zn2+, the induction time increases, although it is low value. Compared to the pure solution, in the presence of 1000 ppm Zn2+ additive, there are high induction times at low supersaturation values and lower induction times in high supersaturation values. For pure boric acid solution, the volume formation energy required for nuclei formation, in homogeneous nucleation, is decreases with the increase of supersaturation and also, in heterogeneous nucleation, it decreases with increasing supersaturation. In the same supersaturation values, the volume formation energy required for homogeneous nucleation is high in the presence of 100 and 500 ppm Zn2+ additives compared to the pure solution. In the presence of 1000 ppm Zn2+ additive, it is close to the value of the pure solution at low supersaturation, and lower at high supersaturation. The nucleation rates calculated in the presence of 100 and 500 ppm Zn2+ additive lower than the pure solution for the same supersaturation values.en_US
dc.language.isotren_US
dc.publisherKonya Teknik Üniversitesien_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectKimya Mühendisliğien_US
dc.subjectChemical Engineeringen_US
dc.subjectAlüminyumen_US
dc.subjectAluminumen_US
dc.subjectBoren_US
dc.subjectBoronen_US
dc.subjectBor minerallerien_US
dc.subjectBoron mineralsen_US
dc.subjectBorik asiten_US
dc.subjectBoric aciden_US
dc.subjectKristalleşmeen_US
dc.subjectCrystallizationen_US
dc.subjectKurşunen_US
dc.subjectLeaden_US
dc.subjectNükleasyonen_US
dc.subjectNucleationen_US
dc.subjectÇinkoen_US
dc.subjectZincen_US
dc.titleBorik asidin metastabil bölge genişliği üzerine Al3+, Zn2+ ve Pb2+ safsızlıklarının etkisien_US
dc.title.alternativeEffect of Al3+, Zn2+ and Pb2+impurities upon metastable zone width of boric aciden_US
dc.typeMaster Thesisen_US
dc.departmentEnstitüler, Lisansüstü Eğitim Enstitüsü, Kimya Mühendisliği Ana Bilim Dalıen_US
dc.identifier.startpage1en_US
dc.identifier.endpage59en_US
dc.institutionauthorReşitoğlu, Aylin-
dc.relation.publicationcategoryTezen_US
dc.identifier.yoktezid657932en_US
item.openairetypeMaster Thesis-
item.languageiso639-1tr-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
Appears in Collections:Tez Koleksiyonu
Files in This Item:
File SizeFormat 
657932.pdf2.09 MBAdobe PDFView/Open
Show simple item record



CORE Recommender

Page view(s)

226
checked on Mar 25, 2024

Download(s)

148
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.