Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/1083
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorÖnen, Vildan-
dc.contributor.authorOtaran, Sevdanur-
dc.date.accessioned2021-12-13T10:34:39Z-
dc.date.available2021-12-13T10:34:39Z-
dc.date.issued2019-
dc.identifier.urihttps://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=4J_FzTwlrMCH4qBROpXPH4yL3WO7W6fqIASYY4_1obrbkwhTPZL0RjGedpkkyMoY-
dc.identifier.urihttps://hdl.handle.net/20.500.13091/1083-
dc.description.abstractYüksek kil içerikli cevherlerin işlenmesi, ince tane boyutu, tabaka yapısı ve kil minerallerinin anizotropik yükü nedeniyle flotasyonda şlam kaplama, mekanik taşıma, köpük kararlılığının değişmesi gibi birtakım problemlere neden olmaktadır. Flotasyonu etkileyen diğer parametrelerle kıyaslandığında hava akış hızı ve köpük yüksekliğinin önemi hala tam olarak anlaşılmamasına rağmen mekanik taşıma ile gang kazanımının bu iki faktörden önemli ölçüde etkilendiği bilinmektedir. Bu tez çalışmasında, Cu cevherlerinde yaygın olarak bulunan kil türlerinin (Kaolen-Montmorillonit) flotasyon performansı ve mekanik taşıma üzerine etkileri incelenmiştir. Kil türü/miktarı (%5-10-15), köpük yüksekliği (1,2,3 cm), hava akış hızı (8,10,12 l/dk) çalışılan deneysel parametrelerdir. Mekanik taşımanın değerlendirilmesinde, toplayıcılı ve toplayıcısız gerçekleştirilen flotasyon deney verileri kullanılarak toplam flotasyon verimi (RT) ve mekanik taşıma verimi (RM) farkından gerçek verim (RG) değerleri belirlenmiştir. Artan kil oranı ile, konsantre tenörünün montmorillonitte düşerken kaolende belirgin bir değişiklik göstermediği belirlenmiştir. Montmorillonit pulp'ın görünür vizkozitesini önemli ölçüde artırmaktadır ve sonuç olarak kabarcık- tane çarpışmasını etkileyerek tenör düşüşüne neden olmaktadır. Montmorillonit içerikli cevherle kaolen içerikli cevhere göre daha düşük verimle konsantre elde edilmiştir. Verim değerlerinin %10 kil oranından sonra artış gösterdiği belirlenmiştir. Bunun nedeni kil minerallerinin, mekanik taşıma ile gelmesidir. Yüksek hava akış hızı ile çalışıldığında tenörün düşüp verimin arttığı tesbit edilmiştir. Hava akış hızı artışı flotasyonda karıştırma etkisini ve köpük yükselme hızını artırarak mekanik taşımayı artırmakta değerli mineral tenörünü azaltmaktadır. Mekanik taşıma verimi açısından köpük yüksekliği kaolen içerikli cevherde belirgin bir etki göstermezken montmorillonitte artan köpük yüksekliği ile düşmüştür. Artan köpük yüksekliği ile montmorillonitte gerçek verim değerleri artarken kaolende düşmüştür. Kaolende artan köpük yüksekliği ile tenörde düşüş pulp içinde askıda kalan ince boyutlu kaolen tanelerinin köpük fazına taşınması ile ilişkilendirilmiştir.en_US
dc.description.abstractProcessing of ores with high clay causes some problems such as slime coating, mechanical entrainment and change of foam stability in flotation, due to fine particle size, layer structure and anisotropic load of clay minerals. Although the importance of air flow rate and foam height is still not fully understood when compered with other parameters affecting flotation, it is known that mechanical entrainment and gangue gain are significantly affected by these two factors. In study, the effects of clay species (Kaolinite- Montmorillonite) commonly found in Cu ores were anvestigated on flotation performance and mechanical entrainment. Clay type/ amount (5- 10- 15 %), foam height (1,2,3 cm) air flow rate (8,10,12 l/min) are studied as experimental parameters. In the evaluation of mechanical entrainment, the actual efficiency (RG) values were determined from the total flotation efficiency (RT) and mechanical entrainment efficiency (RM) difference by using flotation test data with collector and without collector. With increasing clay content, it was determined that the grade of concentrate did not show a significant change in kaolin while it decreased in montmorillonite. Montmorillonite significantly increases the apparent viscosity of the pulp and consequently affects the bubble-particulate collision, resulting in grade of concentrate decreases. It was obtained with lower efficiency concentrate with montmorillonite containing ore than kaolin containing ore. The efficieny values increased after 10% clay content due to the mechanical entrainment of clay minerals to the concentrate. When working with high air flow rate, it was found that the grade decreases and yield increases. The increase in the air flow rate increases the stirring effect and the rate of foam rise in the flotation and increases the mechanical entrainment and reduces the valuable mineral grade. In term of mechanical entrainment efficiency, the foam height did not show a significant effect on the kaolin-containing ore but decreased with increasing foam height in montmorillonite. With increasing foam height, the actual efficiency values increased in montmorillonite but decreased in kaolin. Decreasing of grade with increasing of foam height in kaolin has been related with the transport the foam phase of suspended fine-sized kaolin particulate in the pulp.en_US
dc.language.isotren_US
dc.publisherKonya Teknik Üniversitesien_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectMaden Mühendisliği ve Madenciliken_US
dc.subjectMining Engineering and Miningen_US
dc.subjectBakıren_US
dc.subjectFlotasyonen_US
dc.subjectKilen_US
dc.subjectMekanik Taşımaen_US
dc.subjectKöpük derinliğien_US
dc.subjectHava akış hızıen_US
dc.subjectCopperen_US
dc.subjectFlotationen_US
dc.subjectClayen_US
dc.subjectMechanical Entrainmenten_US
dc.subjectFoam depthen_US
dc.subjectAir flow rateen_US
dc.titleBakır cevheri flotasyonunda kil minerallerinin mekanik taşımaya etkisien_US
dc.title.alternativeEffect of clay minerals on the mechanical entrainment in the flotation of copper oreen_US
dc.typeMaster Thesisen_US
dc.departmentEnstitüler, Lisansüstü Eğitim Enstitüsü, Maden Mühendisliği Ana Bilim Dalıen_US
dc.identifier.startpage1en_US
dc.identifier.endpage67en_US
dc.institutionauthorOtaran, Sevdanur-
dc.relation.publicationcategoryTezen_US
dc.identifier.yoktezid616878en_US
item.openairetypeMaster Thesis-
item.languageiso639-1tr-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
Appears in Collections:Tez Koleksiyonu
Files in This Item:
File SizeFormat 
616878.pdf2.23 MBAdobe PDFView/Open
Show simple item record



CORE Recommender

Page view(s)

224
checked on Mar 25, 2024

Download(s)

218
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.