Please use this identifier to cite or link to this item:
https://hdl.handle.net/20.500.13091/5218
Title: | Synthesis of a novel green biopolymer-based composites beads for removal of methylene blue from aquatic medium: isotherm, thermodynamic and kinetic investigation | Authors: | Parlayıcı, Şerife Aras, Aslı |
Keywords: | Biowaste Chitosan Nano Fe3O4 Methylene blue Adsorption Aqueous-Solution Basic Dye Activated Carbon Adsorptive Removal Crystal Violet Waste-Water Textile Dye Adsorbent Equilibrium Sorption |
Publisher: | Springer | Abstract: | The increase in the world population and the decrease in clean water resources increase people's interest in water purification technologies. Many industries, such as the textile industry, leather industry, cosmetics and food industry, color their products with substances such as dyes and pigments. In this study, a cheap, useful, innovative, environmentally friendly, and sustainable adsorbent was developed for the removal of Methylene Blue (MB), one of the dyes that is harmful to the environment. In fruit tree cultivation, in addition to the product, very high amounts of by-products/waste (branches, bark, leaves, fruit seeds, fruit shells, etc.) are produced. In this direction, walnut tree and olive tree wastes were immobilized with chitosan, made magnetic (m-WCH and m-OCH), and the adsorption of MB on the developed adsorbents was examined in a batch system. Characterization of the synthesized biocomposite adsorbents was performed by FT-IR, SEM, EDX and XRD analyzes. It has been thoroughly described how the pH solution of the MB dye compares to the pH(PZC) of the adsorbent surface. The pH(PZC) values for m-WCH and m-OCH were 5.2 and 5.5 respectively. MB adsorption of biocomposites depends on the pH of the environment (3-8), amount of adsorbent (2-10 gL(-1)), contact time (5-360 min), temperature (25-55degree celsius) and initial dye concentration (10-250 ppm) was examined as a function. The obtained data were evaluated with kinetic and isotherm models. Using adsorption equilibrium data obtained from MB adsorption studies using m-WCH and m-OCH biocomposite adsorbents, their suitability to Langmuir, Freundlich, Stachard, Dubinin-Radushkevich and Temkin models was examined. The empirical data of MB adsorption by m-WCH and m-OCH showed agreement with the Langmuir isotherm model. The maximum adsorption capacity for MB by m-WCH and m-OCH was estimated to be 85.47 mg g(-1) and 53.48 mg g(-1), respectively. The result showed that a higher adsorption selectivity on m-WCH compares to m-OCH. Among the kinetic models applied, the pseudo-second-order kinetic model was identified with the highest regression coefficients. In the light of these results, it was determined that there are new promising adsorbents of natural origin, with higher adsorption capacity, lower cost, and alternatives to commercially used adsorbents in the removal of MB from aqueous media. | URI: | https://doi.org/10.1007/s00289-024-05164-6 https://hdl.handle.net/20.500.13091/5218 |
ISSN: | 0170-0839 1436-2449 |
Appears in Collections: | Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collections WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collections |
Show full item record
CORE Recommender
WEB OF SCIENCETM
Citations
3
checked on Aug 31, 2024
Page view(s)
34
checked on Aug 26, 2024
Google ScholarTM
Check
Altmetric
Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.