Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/2160
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGarip, Beysim-
dc.contributor.authorYüksel, Ayten-
dc.contributor.authorEr, Necati-
dc.contributor.authorBedeloğlu, Ayşe-
dc.date.accessioned2022-02-26T20:58:16Z-
dc.date.available2022-02-26T20:58:16Z-
dc.date.issued2021-
dc.identifier.issn2667-8055-
dc.identifier.urihttps://doi.org/10.36306/konjes.734413-
dc.identifier.urihttps://dergipark.org.tr/tr/pub/konjes/issue/60526/734413-
dc.identifier.urihttps://dergipark.org.tr/tr/download/article-file/1094371-
dc.identifier.urihttps://hdl.handle.net/20.500.13091/2160-
dc.descriptionDergiPark: 734413en_US
dc.descriptionkonjesen_US
dc.description.abstractPolyester (PES), in other words, polyethylene terephthalate (PET) is one of the synthetic polymers that have an important position in the textile industry. Polyester yarns and fabrics have superior properties such as high strength to stress, resistance to bacteria and heat, flexibility, maintainability, and quick drying after washing. In this study, fully drawn yarn (FDY) and textured partially drawn polyester (POY) yarn which have the same yarn counts (167/48 dtex/filament) were produced as filaments by combining them in different number of nips (8, 29, 54, 75, 85 number/meter) with the air covering method.Then knitted fabric surfaces were created and dyed using these filaments. The effects of number of nips on polyester yarn and fabric were evaluated with their visual and physical performance characteristics.Maximum and minimum strength values for yarns with different different number of nips were measured as 3.41 and 3.23 cN / dtex for yarns with 29 and 8 number of nips, respectively. It was observed that the air permeability decreases while the fabric thickness increases with the increasing number of nips in dyed fabrics.en_US
dc.description.abstractPoliester (PES) diğer bir deyişle polietilen tereftalat (PET) tekstil sektöründe önemli yere sahip olan sentetik polimerlerden biridir. Poliester iplik ve kumaşlar, gerilmeye karşı yüksek dayanım, bakterilere ve ısıya karşı direnç, elastiklik, bakım kolaylığı ve yıkama sonrası çabuk kuruma gibi üstün özelliklere sahiptir. Bu çalışmada, aynı iplik numaralarına sahip (167/48 dtex/filament) tam çekimli (fully drawn yarn) (FDY) ve tekstüre kısmen çekilmiş poliester iplikler (partially oriented) (POY), hava ile kaplama (air covering) yöntemiyle farklı punta sayılarında (8, 29, 54, 75, 85 adet/metre) birleştirilerek filament şeklinde üretilmiştir. Daha sonra bu filamentler kullanılarak örme kumaş yüzeyleri oluşturulmuş ve boyama yapılmıştır. Punta sayısının, poliester iplik ve kumaş üzerine etkileri, görsel ve fiziksel performans özellikleri ile değerlendirilmiştir. Farklı punta sayısına sahip ipliklerde, en yüksek ve en düşük mukavemet değeri, sırasıyla 29 punta (3,41 cN/ dtex) ve 8 punta (3,23 cN/ dtex ) sayısına sahip ipliklerde elde edilmiştir. Genel olarak, boyalı kumaşlarda punta sayısının artması sonucunda kumaş kalınlığı artarken hava geçirgenliğinin azaldığı gözlenmiştir.en_US
dc.language.isoenen_US
dc.publisherKonya Technical Universityen_US
dc.relation.ispartofKonya Mühendislik Bilimleri Dergisien_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectFilamenten_US
dc.subjectFDYen_US
dc.subjectPOYen_US
dc.subjectpolyesteren_US
dc.subjectnipsen_US
dc.subjecttextureden_US
dc.subjectair coveringen_US
dc.subjectintermingled yarnen_US
dc.subjectFilamenten_US
dc.subjectFDYen_US
dc.subjectPOYen_US
dc.subjectpolyesteren_US
dc.subjectpuntaen_US
dc.subjecttekstüreen_US
dc.subjecthava ile kaplamaen_US
dc.subjectpuntalı ipliken_US
dc.titleInvestigation of the Effects of Different Number of Nips on the Properties of Polyester Fabricen_US
dc.title.alternativeFARKLI PUNTA SAYILARININ POLİESTER KUMAŞ ÖZELLİKLERİ ÜZERİNDEKİ ETKİLERİNİN İNCELENMESİen_US
dc.typeArticleen_US
dc.identifier.doi10.36306/konjes.734413-
dc.departmentKTÜNen_US
dc.identifier.volume9en_US
dc.identifier.issue1en_US
dc.identifier.startpage25en_US
dc.identifier.endpage35en_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Başka Kurum Yazarıen_US
item.openairetypeArticle-
item.languageiso639-1en-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
Appears in Collections:Konya Mühendislik Bilimleri Dergisi
Files in This Item:
File SizeFormat 
10.36306-konjes.734413-1094371.pdf991.58 kBAdobe PDFView/Open
Show simple item record



CORE Recommender

Page view(s)

208
checked on Mar 25, 2024

Download(s)

60
checked on Mar 25, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.