Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/2138
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKılınç, İbrahim-
dc.contributor.authorYetgin, Salih Hakan-
dc.date.accessioned2022-02-26T20:58:14Z-
dc.date.available2022-02-26T20:58:14Z-
dc.date.issued2021-
dc.identifier.issn2667-8055-
dc.identifier.urihttps://doi.org/10.36306/konjes.910573-
dc.identifier.urihttps://dergipark.org.tr/tr/pub/konjes/issue/64647/910573-
dc.identifier.urihttps://dergipark.org.tr/tr/download/article-file/1688113-
dc.identifier.urihttps://hdl.handle.net/20.500.13091/2138-
dc.descriptionDergiPark: 910573en_US
dc.descriptionkonjesen_US
dc.description.abstractIn this study, 5%, 15%, 30%, 45%, 60%, and 75% graphite filled cyclo-olefin copolymer (COC) polymers have been produced by extrusion and pressure molding technics. Wear and friction tests have been carried out at the sliding speeds of 0.5 m/s, 1.0 m/s and 1.5 m/s, applied loads of 20 N, 30 N, 40 N and under dry conditions using pin-on-disc system. As a result of the experiments, coefficient of friction increases while wear rate decreases with increase both applied load and sliding speed. The lowest coefficient of friction and the wear ratio have been obtained in weight of 75% graphite filled COC composites. The coefficient of friction and wear rate of the 75% graphite filled COC polymer decreased by 87.7% and 498.79%, respectively.en_US
dc.description.abstractBu çalışmada, ağırlıkça %5, %15, %30, %45, %60 ve %75 oranlarında grafit katkılı siklo-olefin kopolimer (COC) kompozitleri ekstrüzyon ve basınçlı kalıplama yöntemleri ile üretilmiştir. Sürtünme ve aşınma deneyleri, disk üzerinde pim sistemi (pim-disk) ile kuru ortam şartlarında, 20 N, 30 N ve 40 N yük ve 0.5 m/s, 1.0 m/s ve 1.5 m/s kayma hızında gerçekleştirilmiştir. COC polimeri ve grafit katkılı COC kompozitlerin artan kayma hızı ve yüke bağlı olarak sürtünme katsayısı azalmış aşınma oranı ise artmıştır. En düşük sürtünme katsayısı ve aşınma oranı %75 grafit katkılı COC kompozitinde elde edilmiştir. COC polimerine eklenen %75 oranındaki grafit katkısı ile sürtünme katsayısı %87.7 oranında, aşınma oranı ise %498.79 oranında azalmıştır.en_US
dc.language.isoenen_US
dc.publisherKonya Technical Universityen_US
dc.relation.ispartofKonya Mühendislik Bilimleri Dergisien_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectWearen_US
dc.subjectGraphiteen_US
dc.subjectCyclo-Olefin Copolymer (COC)en_US
dc.subjectFrictionen_US
dc.subjectAşınmaen_US
dc.subjectGrafiten_US
dc.subjectSiklo-Olefin Kopolimer (COC)en_US
dc.subjectSürtünmeen_US
dc.titleInvestigation of Tribological Properties of Graphite Filled Cyclo-Olefin Copolymer (COC) Compositesen_US
dc.title.alternativeGRAFİT KATKILI SİKLO-OLEFİN KOPOLİMER (COC) KOMPOZİTLERİN TRİBOLOJİK ÖZELLİKLERİNİN İNCELENMESİen_US
dc.typeArticleen_US
dc.identifier.doi10.36306/konjes.910573-
dc.departmentKTÜNen_US
dc.identifier.volume9en_US
dc.identifier.issue3en_US
dc.identifier.startpage702en_US
dc.identifier.endpage712en_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Başka Kurum Yazarıen_US
item.openairetypeArticle-
item.languageiso639-1en-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
Appears in Collections:Konya Mühendislik Bilimleri Dergisi
Files in This Item:
File SizeFormat 
10.36306-konjes.910573-1688113.pdf789.47 kBAdobe PDFView/Open
Show simple item record



CORE Recommender

Page view(s)

124
checked on Mar 25, 2024

Download(s)

62
checked on Mar 25, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.