Ağaçayak, Tevfik2023-05-312023-05-3120230972-28150975-1645https://doi.org/10.1007/s12666-023-02940-2https://hdl.handle.net/20.500.13091/4125In this study, optimization of oil agglomeration parameters of Beysehir-Bayavsar lignite using Box-Behnken design (BBD) was investigated. BBD model predicted responses, the coefficient of determination R-2 for the percentage of ash% and combustible recovery% (CR) of the agglomerates was obtained as 0.97 and 0.90, respectively. These results showed a good correlation between the calculated and observed values. The estimated the percentage of ash content and CR% values were determined as 15.81% and 73.73%, respectively. The best results were obtained in test 22, the zeta potential value was - 11.61 mV, the contact angle was 107 degrees, and the calorific value was 4702 kcal/kg at pH 3.eninfo:eu-repo/semantics/closedAccessOil agglomerationLigniteOptimizationBox-Behnken designResponse-Surface MethodologyCoal FinesParticle-SizeBituminous CoalPerformanceFlotationRecoveryArticle10.1007/s12666-023-02940-22-s2.0-85152424923