Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/92
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorArslan, Musa Hakan-
dc.contributor.advisorGemi, Lokman-
dc.contributor.authorAlsdudi, Mohammed-
dc.date.accessioned2021-12-13T10:19:45Z-
dc.date.available2021-12-13T10:19:45Z-
dc.date.issued2021-
dc.identifier.urihttps://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=wf-FPgY-5qjHEzEoOgvMs_BJs819Rxo6GoQZ3m8fMPHRlQnULfDvzb6Eo28GtKw--
dc.identifier.urihttps://hdl.handle.net/20.500.13091/92-
dc.description.abstractBu çalışmada kesme kapasitesi yetersiz denge altı dikdörtgen kesitli betonarme kirişlerin kesme açıklıkları boyunca dıştan CFRP ile güçlendirilmesi sonucunda düşey yük altında değişen davranışı deneysel olarak incelenmiştir. Çalışmada yapım yönetmeliklerinde yer alan normlara göre kiriş davranışını gerek dayanım gerekse süneklik açısından ideal seviyeye getirecek olan CFRP'nin optimum şerit genişliği (wf) / şerit aralıkları (sf) oranı belirlenmiştir. Deneysel çalışmada, ½ ölçekli 8 adet 125 x 250 x 2500 mm boyutlarında betonarme kiriş numunesi hazırlanmıştır. Kirişlerde kesme kapasitesinin yetersiz olması için etriyeler Ø5 / 35 cm olacak şekilde seçilmiştir. Numunelerden bir tanesi güçlendirilmeden referans olarak test edilirken diğer numunelerin kesme açıklıkları boyunca artan CFRP (wf) / (sf) oranlarda güçlendirilerek testleri gerçekleşmiştir. Deneysel sonuçlarına göre (wf) / (sf) oranın 0.55'i geçmesi ile beraber kiriş davranışı kesme kırılması yerine eğilme kırılması gözlemlenmiştir. Bununla beraber kirişin yönetmelik normlarına göre yeterli kesme rezerv değerine ulaşabilmesi için (wf) / (sf) oranın 0.82'ye kadar çıkarılması gerektiği de görülmektedir. Çalışmada kullanılan CFRP'nin yönü ve gramajının güçlendirmede en önemli etkenlerden biri olduğu ve kullanılan 240 gr/m2 lik CFRP'nin kesme bölgelerinde betonun çatlaması ile beraber ani kopmalar yaşadığı görülmüştür. Yönetmeliklerde yer alan kapasite formüllerinde CFRP malzemesi ile ilgili gerek yön gerekse gramaj bilgilerinin bulunmaması ise bir eksiklik olarak düşünülmüştür.en_US
dc.description.abstractIn this study, the behavior of the reinforced concrete beams having insufficient shear capacity under vertical loads was experimentally examined and the optimum strip width (wf) / strip spacing (sf) ratio of the CFRP, which will bring the behavior to the ideal level according to the code norms, was determined as a result of the strengthening of the beams with CFRP. In the experimental study, 8 samples of 125 x 250 x 2500 mm reinforced concrete beams with ½ scaled were prepared. In order to have insufficient shear capacity in the beams, stirrups were chosen as Ø5 / 35 cm. The other specimens were tested at increasing CFRP (wf) / (sf) ratios along the shear span, while one of the samples was tested as reference without strengthening. According to the experimental results, when the (wf) / (sf) ratio exceeds 0.55, the brittle behavior changes as ductile behavior. However, it is also seen that (wf) / (sf) ratio should be increased up to 0.82 in order for the beam to reach sufficient shear capacity according to the code norms. It was observed that the direction and unit weight for per square meter of the CFRP used in the study was one of the most important factors in strengthening and especially the 240 gr / m2 CFRP experienced sudden ruptures in the shear areas together with the shear cracks of the concrete.en_US
dc.language.isotren_US
dc.publisherKonya Teknik Üniversitesien_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectİnşaat Mühendisliğien_US
dc.subjectCivil Engineeringen_US
dc.titleKesme dayanımı yetersiz betonarme kirişlerin güçlendirilmesinde optimum lifli polimer miktarının belirlenmesien_US
dc.title.alternativeDetermination of optimum frp composite amount in strengthening reinforced concrete beams with inadequate shear strengthen_US
dc.typeMaster Thesisen_US
dc.departmentEnstitüler, Lisansüstü Eğitim Enstitüsü, İnşaat Mühendisliği Ana Bilim Dalıen_US
dc.identifier.startpage1en_US
dc.identifier.endpage87en_US
dc.institutionauthorAlsdudı, Mohammed-
dc.relation.publicationcategoryTezen_US
dc.identifier.yoktezid658011en_US
item.openairetypeMaster Thesis-
item.languageiso639-1tr-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
Appears in Collections:Tez Koleksiyonu
Files in This Item:
File SizeFormat 
658011.pdf5.8 MBAdobe PDFView/Open
Show simple item record



CORE Recommender

Page view(s)

246
checked on Mar 25, 2024

Download(s)

338
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.