Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/629
Title: Polibenzimidazol ve polibenzoksazol esaslı nanofiberlerin hazırlanması ve özelliklerinin incelenmesi
Other Titles: Preparation and investigation of properties of polybenzimidazole and polybenzoxazole based nanofibers
Authors: Göl, Havva Dinç
Advisors: Özaytekin, İlkay
Keywords: Kimya Mühendisliği
Chemical Engineering
Publisher: Konya Teknik Üniversitesi
Abstract: Bu tez çalışmasında farklı çözücüler ve elektrospin yapabilen farklı hibrit polimerler kullanılarak, polibenzimidazol (PBI) ve polibenzoksazol (PBO) nanofiberlerin elde edilmesi amaçlanmıştır. Elde edilen nanofiberlerin bazı özellikleri incelenerek en uygun çözücü çifti ve hibrit polimeri seçilmiştir. Elektrospin işleminde kullanılan PBI ve PBO polimerleri, hidroksamoil klorürler [tereftalohidroksamoil klorür, 4,4'-bis(fenilhidroksamoil klorür), 4,4'-bis(fenil hidroksamoil klorür)eter] ile aromatik amin [3,3'-diamino benzidin ve 3,3'-dihidroksi benzidin] monomerlerinin polikondenzasyon reaksiyonundan elde edilmiştir. PBI ve PBO elektrospin çözeltisi DMF, THF ve Ac çözücüleri kullanılarak hazırlanmıştır. Ayrıca elektrospin yapılabilen polimerlerden PVP, PS ve PVDF polimerleri de hibrit polimer olarak kullanılmıştır. Hazırlanan çözeltiler ile elde edilen nanofiberlerin, iec ve yüzey temas açısı değerlerine çözücü etkisi incelenmiştir. DMF/Ac çözücü çiftinin 3/1 oranındaki çözeltisiyle hazırlanan PVDF hibrit nanofiberler, en iyi iec ve yüzey temas açısı değerinde bulunmuştur. PBONF3 nanofiberi 143,1o 'lik yüzey temas açısına sahip en iyi nanofiber olarak belirlenmiştir. En yüksek iyon değişim kapasitesi 2,5 mmol/g olarak PBINF2 nanofiberi için bulunmuştur. Çözücü seçiminin SEM analizi fiber çapı üzerinde etkisi incelenmiştir. PBINF ve PBONF hibrit yapılarının fiber çap dağılım grafiklerinden 150-450 nm arasında fiber çap dağılımına sahip olduğu gözlenmiştir. Su tutma kapasiteleri PVP ile hazırlanan nanofiberlerde PVP'nin biyobozunur olmasından dolayı hesaplanamamıştır. PVDF ile hazırlanan nanofiberler %14,7 - %38.46 aralığında su tutmuştur. FT-IR analizleri ile nanofiberlerin karakterizasyonu belirlenmiştir. Termal dayanımı ve nanofiberlerin kütlece yüzde içeriğini tanımlamak için TGA analizi yapılmıştır. TGA analizlerine göre nanofiberlerin ilk bozunma sıcaklıkları 400-450 ºC aralığında tespit edilmiştir. Hacim fraksiyonu ile su tutma kapasitesi arasındaki ilişki incelenmiştir. PBONF3'ün % 19'luk hacim fraksiyonuna ve % 14,7'lik su tutma kapasitesine sahip en iyi hidrofobik nanofiber olduğu belirlenmiştir. Ayrıca tüm nanofiberler için ses sönümleme testi yapılmış ve yüksek oranda ses sönümleme özelliklerinin olduğu gözlenmiştir. Sonuç olarak bu çalışmada hafif, yüksek iyon değişim kapasiteli, termal dayanımlı, hidrofobik karakterli ve ses sönümleme özelliği olan nanofiber malzemeler elde edilmiştir.
In this thesis, it is aimed to obtain polybenzimidazole (PBI) and polybenzoxazole (PBO) nanofibers by using different solvents and different hybrid polymers capable of electrospinning. The most suitable solvent pair and hybrid polymer were selected by examining some properties of the obtained nanofibers. The PBI and PBO polymers used in the electrospin treatment are obtained from the polycondensation reaction of hydroxamoyl chlorides [terephthalohydroxamoyl chloride, 4,4'-bis (phenylhydroxamoyl chloride), 4,4'-bis (phenyl hydroxamoyl chloride) ether] with aromatic amine [3,3'-diaminobenzidine and of 3,3'-dihydroxybenzidine] monomers. The PBI and PBO electrospin solutions were prepared using DMF, THF and Ac solvents. In addition, PVP, PS and PVDF polymers which are electrospinable polymers were used as hybrid polymers. Solvent effect of nanofibers obtained with the prepared solutions on iec and surface contact angle values were investigated. PVDF hybrid nanofibers prepared with a 3/1 solution of DMF / Ac solvent pair were found to have the best ion and surface contact angle. PBONF3 nanofiber was identified as the best nanofibers with a surface contact angle of 143,1º. The highest ion exchange capacity was found to be 2.5 mmol / g for PBINF2 nanofibers. The effect of solvent selection on SEM fiber diameter was investigated. PBINF and PBONF hybrid structures are found fiber diameter distribution between 150-450 nm from fiber diameter distribution graphs. Water uptake capacities could not be calculated due to the biodegradability of PVP in nanofibers prepared with PVP. Nanofibers prepared with PVDF uptake water in the range of 14.7 % - 38.46 %. Characterization of nanofibers was determined by FT-IR analysis. TGA analysis was performed to determine the thermal strength and percentage content of the nanofibers by mass. According to TGA analysis, first decomposition temperatures of nanofibers were determined between 400-450 ºC. The relationship between volume fraction and water uptake capacity was investigated. PBONF3 was determined to be the best hydrophobic nanofiber with a volume fraction of 19% and a water uptake capacity of 14.7%. In addition, the sound absorption test was performed for all nanofibers and it was observed that they had high sound absorption properties. As a result, in this study, lightweight, high ion exchange capacity, thermal strength, hydrophobic character and sound damping properties of nanofiber materials were obtained.
URI: https://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=jNRDC1RLfVd4_T7x7ZXmmb2Jxfe2xWIsKPXdcFsOe4-4OXCqqWYkGSstedJvbA2t
https://hdl.handle.net/20.500.13091/629
Appears in Collections:Tez Koleksiyonu

Files in This Item:
File SizeFormat 
570874.pdf6.51 MBAdobe PDFView/Open
Show full item record



CORE Recommender

Page view(s)

254
checked on Mar 25, 2024

Download(s)

364
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.