Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/523
Title: Çelik yapılarda bulonlu ve kaynaklı birleşimlerde korozyon etkisinin incelenmesi
Other Titles: Investigation of corrosion effect on bolted and welded connections in steel structures
Authors: Duysak, Yasin
Advisors: Yavuz, Günnur
Keywords: İnşaat Mühendisliği
Civil Engineering
Kaynaklı yapılar
Welded structures
Korozyon
Corrosion
Çelik yapılar
Steel structures
Çelik yüzeyler
Steel surfaces
Publisher: Konya Teknik Üniversitesi
Abstract: Çelik taşıyıcı sistemler, günümüzde yüksek taşıma kapasitesine sahip olmaları, sünek davranış göstermeleri gibi özelliklerinden dolayı tercih edilen taşıyıcı sistemlerdir. Üretim aşamasında iyi bir kontrolden geçmiş olan çelik malzemesinden üretilmiş çelik yapı elemanlarının taşıyıcı özellikleri çeşitli çevresel etkiler nedeniyle zarar görerek zamanla azalabilmektedir. Çelik yapı elemanlarının bünyesinde bozulmalara neden olabilen bu zararlı etkilerin en önemlilerinden biri korozyon hasarıdır. Korozyon olayı çevresel etkiler altında çelik taşıyıcı sistemlerde kaçınılmaz olabilmektedir. Korozyonun, hem fiziksel hem de kimyasal olarak bir değişim meydana getirmesinden dolayı oluşacak hasar daha da önemli hale gelmektedir. Korozyon oluşumu, metallerde kütle kaybına neden olduğu için elemanın dayanımında ve kullanım ömründe azalma meydana getirmekte ve oluşan kimyasal reaksiyonlarla da malzemenin özelliklerini değiştirebilmektedir. Korozyondan korunabilmek için korozyonun oluşum mekanizmasının bilinmesi önemlidir. Korozyon hasarının oluşma ihtimali ve yapıya etkilerinin önceden hesaba katılmaması durumunda yenileme ve bakım işlemleri zahmetli ve pahalı olabilmektedir. Bu tez çalışmasında farklı kalınlıktaki (4 mm ve 6 mm) S235 kalitesinde çelikten üretilmiş levhalarda ve farklı birleşim türlerinde (bulonlu, küt kaynaklı ve köşe kaynaklı) çelik elemanlar korozyona uğratılmış ve eksenel çekme kuvveti etkisi altında deneye tabi tutulmuştur. Çelik deney elemanlarında korozyon hasarı oluşumu sonucunda gözlenen davranış farklılığı ve eksenel çekme yük taşıma kapasitesindeki değişimler incelenmiştir. Deneyler sonucunda çelik malzemesinin korozyona uğraması ile korozyonsuz referans numuneye göre dayanım değerlerinde en düşük azalma 6 mm kalınlığındaki bulonlu birleşimli levhalarda bulonda yapay korozyon olan numunelerde %3 oranında ve en yüksek azalma ise 6 mm kalınlığında bulonlu birleşimli levhada sadece bulonda korozyon olan numunede %37 oranında gözlenmiş ve malzeme özelliklerinde değişimler meydana gelmiştir. Korozyon sonucunda malzemedeki kütle kaybı lineer azalmasına rağmen çekme dayanımdaki azalmaların ve levhalardaki değişimlerin lineer olmadığı görülmüştür.
Steel structural systems are preferred structural systems due to their high bearing capacity and ductile behavior. Structural properties of steel structural elements made of steel material which have undergone a good control during the production phase can be damaged by time due to various environmental effects. Corrosion damage is one of the most important of these harmful effects which may cause deterioration of the steel structure elements. Corrosion can be inevitable in steel structural systems under environmental effects. Damage due to both physical and chemical changes of corrosion becomes even more important. It is important to know the mechanism of corrosion to be protected from corrosion. In the event of the possibility of corrosion damage and not taking into account the effects on the structure, renewal and maintenance can be laborious and expensive. In this thesis, steel members of different thicknesses (4 mm and 6 mm) in S235 grade steel and in different types of joints (bolted, butt welded and fillet welded) were corroded and tested under the effect of axial tensile force. Changes in the behavior and axial tensile load bearing capacity observed as a result of corrosion damage in steel test elements were investigated. As a result of the experiments, the lowest decrease in the strength values compared to the non-corrosion reference specimen with the corrosion of the steel material was observed as 3% in the 6 mm-thick bolted joint plates with artificial corroded bolts and the highest reduction was observed by 37% in the sample with only 6 mm thick bolt-jointed plates and changes in material properties. As a result of the corrosion, it was observed that the decrease in tensile strength and the changes in the plates were not linear despite the linear loss of the material.
URI: https://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=Mir2lXQK1dkmQ9Ige3PZbp57BvaAc1gttUUNymwtl0i8AdUd7kGv9MNeeODZYq_z
https://hdl.handle.net/20.500.13091/523
Appears in Collections:Tez Koleksiyonu

Files in This Item:
File SizeFormat 
551523.pdf6.48 MBAdobe PDFView/Open
Show full item record



CORE Recommender

Page view(s)

1,010
checked on Mar 25, 2024

Download(s)

138
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.