Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/3655
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHussain, Nafsiah Binti-
dc.contributor.authorAkgül, Eda Taga-
dc.contributor.authorYılmaz, Murat-
dc.contributor.authorParlayıcı, Şerife-
dc.contributor.authorHadibarata, Tony-
dc.date.accessioned2023-03-03T13:32:23Z-
dc.date.available2023-03-03T13:32:23Z-
dc.date.issued2022-
dc.identifier.issn1522-6514-
dc.identifier.issn1549-7879-
dc.identifier.urihttps://doi.org/10.1080/15226514.2022.2144796-
dc.identifier.urihttps://hdl.handle.net/20.500.13091/3655-
dc.description.abstractNOVELTY STATEMENTThe novelty of this study is the selection of Moringa oleifera plants as suitable plant species for activated carbon synthesis by adopting appropriate procedures for bisphenol A removal. Although the biowaste-derived activated carbons prepared by different activation methods have been studied before, M. oleifera plants activated carbon prepared via ZnCl2 activation for bisphenol A adsorption was not reported. This study will be a significant endeavor in promoting alternative techniques for BPA removal. Using activated carbon derived from agricultural waste will replace commercial activated carbon which is more economic and environmentally friendly. This study will bring tremendous environmental and economic benefits as well as limit the harmful effect. The use of agricultural by-products such as Moringa oleifera plants is one effort to support the reduction of environmental pollution. Activated carbon produces from agricultural wastes is relatively less expensive and can replace traditional methods such as renewable as well as nonrenewable materials such as petroleum residue and coal. In this study, the removal of bisphenol A from aqueous media was studied using activated carbon produced from M. oleifera pods and peels. A batch adsorption study was carried out by varying the parameters of the adsorption process. A maximum removal percentage of 95.46% was achieved at optimum conditions of 2.5 g L-1 adsorbent dose, pH 7, 60 min contact time and 20 mg L-1 initial concentration of BPA. The BET surface areas of MOP, MOP-AC and MOP-ACZ were found to be 12.60, 4.10 and 45.96 m(2)/g, respectively. The experimental data were analyzed by Langmuir, Freundlich and Temkin adsorption isotherm models. Equilibrium data fitted well with the Langmuir isotherm with a maximum monolayer adsorption capacity of 20.14 mg g(-1). The rates of adsorption were found to conform to the pseudo-second-order kinetics with a good correlation. The results indicate that the M. oleifera activated carbon could be employed as a low-cost alternative to commercial activated carbon in the removal of BPA from water.en_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofInternational Journal of Phytoremediationen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectActivated carbonen_US
dc.subjectadsorptionen_US
dc.subjectbisphenol Aen_US
dc.subjectMoringa oleiferaen_US
dc.subjectAqueous-Solutionen_US
dc.subjectMethylene-Blueen_US
dc.subjectMalachite Greenen_US
dc.subjectCoconut Husken_US
dc.subjectBasic Dyeen_US
dc.subjectRemovalen_US
dc.subjectEquilibriumen_US
dc.subjectIsothermen_US
dc.subjectWateren_US
dc.subjectOptimizationen_US
dc.titlePreparation and characterization of low-cost activated carbon from Moringa oleifera chemically activated using ZnCl2 for the adsorption of bisphenol Aen_US
dc.typeArticleen_US
dc.identifier.doi10.1080/15226514.2022.2144796-
dc.identifier.pmid36437736en_US
dc.identifier.scopus2-s2.0-85142866868en_US
dc.departmentKTÜNen_US
dc.authoridHadibarata, Tony/0000-0002-1060-994X-
dc.authorwosidHadibarata, Tony/E-1670-2012-
dc.identifier.wosWOS:000891823900001en_US
dc.institutionauthor-
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanen_US
dc.authorscopusid57169686400-
dc.authorscopusid14032766200-
dc.authorscopusid57373810300-
dc.authorscopusid25626559600-
dc.authorscopusid16233109100-
dc.identifier.scopusqualityQ2-
item.cerifentitytypePublications-
item.grantfulltextembargo_20300101-
item.languageiso639-1en-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.openairetypeArticle-
item.fulltextWith Fulltext-
crisitem.author.dept02.01. Department of Chemical Engineering-
Appears in Collections:PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collections
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collections
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collections
Show simple item record



CORE Recommender

WEB OF SCIENCETM
Citations

3
checked on Apr 20, 2024

Page view(s)

158
checked on Apr 15, 2024

Download(s)

4
checked on Apr 15, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.