Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/2087
Full metadata record
DC FieldValueLanguage
dc.contributor.authorOsmanoğlu, Serhat-
dc.contributor.authorSelver, Erdem-
dc.contributor.authorİmal, Muharrem-
dc.date.accessioned2022-02-26T20:57:10Z-
dc.date.available2022-02-26T20:57:10Z-
dc.date.issued2020-
dc.identifier.issn2667-8055-
dc.identifier.urihttps://doi.org/10.36306/konjes.745739-
dc.identifier.urihttps://dergipark.org.tr/tr/pub/konjes/issue/54508/745739-
dc.identifier.urihttps://dergipark.org.tr/tr/download/article-file/1131792-
dc.identifier.urihttps://hdl.handle.net/20.500.13091/2087-
dc.descriptionDergiPark: 745739en_US
dc.descriptionkonjesen_US
dc.description.abstractSandwich composite structures are commonly used in different areas such as aerospace, marine, space, architectural structures where high strength and stiffness are required as well as the weight is a critical problem. Mechanical properties of the sandwich panels were affected by facesheets type, facesheet density and dimensions of the core materials. In this study, different thicknesses of PVC (polyvinyl chloride) foams were used as corepart of sandwich panels. PVC foam cores and sandwich composites with unidirectional and biaxial carbon fiber fabric face sheets were produced using vacuum infusion method and strength of the panels which have different fiber orientations were compared with 3-point bending and compression tests. Also, the effect of core thickness on core shear stress and flexural strength was investigated by using core materials of different thickness PVC foam. As a result, directions of fiber in facesheets was observed to be an important parameter in face strength. It was obtained that increasing the thickness of the core in the sandwich panels decreased the flexural and compressive strength of sandwich composites.en_US
dc.description.abstractSandviç kompozit malzemelerin yüksek mukavemet ve rijitlik istenen, aynı zamanda ağırlığın problem olduğu havacılık endüstrisi, denizcilik endüstrisi, uzay ve mimari yapılar gibi alanlarda kullanımı yaygınlaşmıştır. Kompozit malzemelerde kullanılan yüzey plakaları, çekirdek malzemenin cinsi, yoğunluğu, boyutları malzemenin mekanik özelliklerini doğrudan etkilemektedir. Bu çalışmada kompozit sandviç panel malzemesinde çekirdek malzeme olarak farklı kalınlıkta PVC (PoliVinil Klorür) köpük kullanılmıştır. Vakum infüzyon yöntemiyle üretilen PVC köpüklü sandviç panellerin yüzey plakalarında tek yönlü ve çift eksenli karbon fiber kumaşlar kullanılmış, farklı fiber yönlenmelerine sahip panellere eğme ve basma deneyleri uygulanarak yüzey dayanımları karşılaştırılmıştır. Ayrıca, PVC köpükten farklı kalınlıkta çekirdek malzemeler kullanılarak çekirdek kalınlığının çekirdek kayma gerilmesi ve eğilme dayanımı üzerine etkisi araştırılmıştır. Sonuç olarak, panel plakalarında fiber yönlerinin yüzey mukavemetini etkileyen önemli bir parametre olduğu gözlemlenmiştir. PVC çekirdekli sandviç panellerde çekirdek kalınlığının artması sonucu basma ve eğilme dayanımının azaldığı ortaya çıkmıştır.en_US
dc.language.isoenen_US
dc.publisherKonya Technical Universityen_US
dc.relation.ispartofKonya Mühendislik Bilimleri Dergisien_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectSandwich compositesen_US
dc.subjectPVC foamen_US
dc.subjectCarbon fibreen_US
dc.subjectMechanical propertiesen_US
dc.subjectSandviç kompozitleren_US
dc.subjectPVC köpüken_US
dc.subjectKarbon lifien_US
dc.subjectMekanik özellikleren_US
dc.titleThe Effect of Carbon Fibre Orientations and Core Thicknesses on Compression and Flexural Properties of Sandwich Compositesen_US
dc.title.alternativeSANDVİÇ KOMPOZİTLERDE ÇEKİRDEK KALINLIĞININ VE KARBON LİF YÖNLENMELERİNİN BASMA VE EĞİLME DAYANIMLARINA ETKİSİen_US
dc.typeArticleen_US
dc.identifier.doi10.36306/konjes.745739-
dc.departmentKTÜNen_US
dc.identifier.volume8en_US
dc.identifier.issue2en_US
dc.identifier.startpage223en_US
dc.identifier.endpage236en_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Başka Kurum Yazarıen_US
item.openairetypeArticle-
item.languageiso639-1en-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
crisitem.author.dept07. 16. Department of Machinery and Metal Technologies-
Appears in Collections:Konya Mühendislik Bilimleri Dergisi
Files in This Item:
File SizeFormat 
10.36306-konjes.745739-1131792.pdf778.56 kBAdobe PDFView/Open
Show simple item record



CORE Recommender

Page view(s)

228
checked on Mar 25, 2024

Download(s)

82
checked on Mar 25, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.