Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/1687
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSalur, Emin-
dc.contributor.authorAslan, Abdullah-
dc.contributor.authorKuntoğlu, Mustafa-
dc.contributor.authorGüneş, Aydın-
dc.contributor.authorŞahin, Ömer Sinan-
dc.date.accessioned2022-01-30T17:32:53Z-
dc.date.available2022-01-30T17:32:53Z-
dc.date.issued2020-
dc.identifier.issn2147-4575-
dc.identifier.issn2147-4575-
dc.identifier.urihttps://doi.org/10.21541/apjes.631260-
dc.identifier.urihttps://app.trdizin.gov.tr/makale/TkRZM05EQTJOZz09-
dc.identifier.urihttps://hdl.handle.net/20.500.13091/1687-
dc.description.abstractKompozit malzemeler kullanılacağı yere göre tasarlanan ve üretilen malzemelerdir. Dolayısıyla kompozit malzemeler aynı üretim metodu kullanılarak kullanılacağı yere göre farklı üretim parametrelerinde üretilebilir. Farklı üretim parametrelerinde üretilen kompozit malzemeler farklı mekanik özelliklere sahip olacağı için bu durum kompozit malzemelerin işlenebilirlik özelliklerini etkiler. Bu sebeple kompozit malzemelerin işlenmesi esnasında oluşan kesme kuvvetlerinin tespit edilmesi ve optimizasyonu önem arz etmektedir. Bu kapsamda, 3 farklı üretim sıcaklığı (350, 400 ve 450?C) ve basıncı (480, 640 ve 820 MPa) ile 4 farklı karışım oranında (ağ. %10, ağ. %20, ağ. %30, ağ. %40) üretilen dökme demir (GGG-40) takviyeli ve bronz matrisli (CuSn10) kompozit malzemelerin kuru kesme şartlarında tornalanması esnasında kesme kuvvetlerinin optimizasyonu gerçekleştirilmiştir. Tam faktöriyel tasarım prensibi ile 36 deney yapılmış ve üç eksende kesme kuvvetleri ölçümü alınarak bileşke kesme kuvveti hesabı yapılmıştır. Deneyler esnasında kesme şartları sabit tutulmuştur (kesme hızı=50 m/dak, ilerleme=0,128 mm/dev ve talaş derinliği=1 mm). Varyans analizi (ANOVA) neticesinde bileşke kesme kuvveti üzerine en çok etkisi olan parametrenin %80 katkı oranıyla birlikte üretim basıncı olduğu tespit edilmiştir.en_US
dc.description.abstractComposites are the type of materials designed and produced according to their usage area. Therefore, composite materials can be produced in accordance with the usage area using the same production method. This situation affects the machinability properties of composites, owing to the fact that different production parameters cause different mechanical properties. For this reason, it is important that the determination and optimization of cutting forces during machining of composite materials. In this context, the optimization of cutting forces of bronze matrix (CuSn10) composites which are reinforced with cast iron (GGG-40) produced using 3 different production temperatures (350,400 and 450?C) and pressure (480, 640 and 820 MPa) and 4 different reinforcement (wt. %10, wt. %20, wt. %30, wt. %40) during dry turning. Full factorial design based 36 experiments were performed and resultant force calculation was carried out with measurement of cutting forces in 3 axes. During experiments cutting conditions were kept constant (cutting speed=50 m/min, feed rate=0,128 mm/rev and depth of cut=1 mm). As a result of analysis of variance (ANOVA), it was found that the parameter which has the most effect on the cutting forces is the production pressure with 80% contribution rate.en_US
dc.language.isotren_US
dc.relation.ispartofACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCEen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleKompozit Malzemelerin Tornalanması Esnasında Oluşan Kesme Kuvvetlerinin Optimizasyonuen_US
dc.title.alternativeOptimization of Cutting Forces During Turning of Composite Materialsen_US
dc.typeArticleen_US
dc.identifier.doi10.21541/apjes.631260-
dc.departmentFakülteler, Mühendislik ve Doğa Bilimleri Fakültesi, Makine Mühendisliği Bölümüen_US
dc.identifier.volume8en_US
dc.identifier.issue3en_US
dc.identifier.startpage423en_US
dc.identifier.endpage431en_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.trdizinid467406en_US
item.openairetypeArticle-
item.languageiso639-1tr-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
crisitem.author.dept02.10. Department of Mechanical Engineering-
Appears in Collections:Mühendislik ve Doğa Bilimleri Fakültesi Koleksiyonu
TR Dizin İndeksli Yayınlar Koleksiyonu / TR Dizin Indexed Publications Collections
Files in This Item:
File SizeFormat 
e19346d1-e278-43d1-80fe-baada899db11.pdf1.06 MBAdobe PDFView/Open
Show simple item record



CORE Recommender

Page view(s)

122
checked on Mar 25, 2024

Download(s)

44
checked on Mar 25, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.