Please use this identifier to cite or link to this item:
https://hdl.handle.net/20.500.13091/1228
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Salur, Emin | - |
dc.contributor.author | Aslan, Abdullah | - |
dc.contributor.author | Kuntoğlu, Mustafa | - |
dc.contributor.author | Güneş, Aydın | - |
dc.contributor.author | Şahin, Ömer Sinan | - |
dc.date.accessioned | 2021-12-13T10:38:36Z | - |
dc.date.available | 2021-12-13T10:38:36Z | - |
dc.date.issued | 2019 | - |
dc.identifier.issn | 1359-8368 | - |
dc.identifier.issn | 1879-1069 | - |
dc.identifier.uri | https://doi.org/10.1016/j.compositesb.2019.02.023 | - |
dc.identifier.uri | https://hdl.handle.net/20.500.13091/1228 | - |
dc.description.abstract | In this study, the metal matrix composite materials were produced by hot press with various production parameters. The drilling experiments were performed on computer numerical control vertical machining centre without cutting fluid. Analysis of variance (ANOVA) was carried out in order to determine the effects of the production parameters on thrust force and surface roughness of metal matrix composites drilled with different feed rate. The effect of production parameters such as temperature, pressure and reinforcement ratio were investigated, and their effects were presented. The optimal level for each production parameters was determined by 'Maximize the S/N ratio approach with a Taguchi design'. The test results revealed that the reinforcement ratio was the main factor affecting the surface roughness of the metal matrix composites for both feed rate. However, same singularity was not matter on thrust force due to close contribution rates of production parameters and high error rates of analysis. In literature, an increase on the thrust force and the surface roughness values was reported as the feed rate increased during machining. Nevertheless, in our MMCs system, the thrust force and the surface roughness values were in tendency of declination / as the feed rate increased which makes this study more novel research. | en_US |
dc.description.sponsorship | Scientific and Technological Research Council of Turkey (TUBITAK)Turkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [113M141] | en_US |
dc.description.sponsorship | This work was supported by the Scientific and Technological Research Council of Turkey (TUBITAK) [grant number 113M141]. | en_US |
dc.language.iso | en | en_US |
dc.publisher | ELSEVIER SCI LTD | en_US |
dc.relation.ispartof | COMPOSITES PART B-ENGINEERING | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Metal-Matrix Composites (Mmcs) | en_US |
dc.subject | Surface Properties | en_US |
dc.subject | Machining | en_US |
dc.subject | Drilling | en_US |
dc.subject | Anova | en_US |
dc.subject | Mechanical-Properties | en_US |
dc.subject | Part Ii | en_US |
dc.subject | Microstructure | en_US |
dc.subject | Wear | en_US |
dc.subject | Optimization | en_US |
dc.subject | Performance | en_US |
dc.subject | Parameters | en_US |
dc.subject | Behavior | en_US |
dc.subject | Carbide | en_US |
dc.title | Experimental study and analysis of machinability characteristics of metal matrix composites during drilling | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1016/j.compositesb.2019.02.023 | - |
dc.identifier.scopus | 2-s2.0-85061773774 | en_US |
dc.department | Fakülteler, Mühendislik ve Doğa Bilimleri Fakültesi, Makine Mühendisliği Bölümü | en_US |
dc.authorid | KUNTOGLU, MUSTAFA/0000-0002-7291-9468 | - |
dc.authorwosid | Gunes, Aydin/AAT-3662-2021 | - |
dc.authorwosid | Gunes, Aydin/AAU-1702-2021 | - |
dc.authorwosid | KUNTOGLU, Mustafa/ABA-2149-2021 | - |
dc.identifier.volume | 166 | en_US |
dc.identifier.startpage | 401 | en_US |
dc.identifier.endpage | 413 | en_US |
dc.identifier.wos | WOS:000467349000037 | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.authorscopusid | 57203764798 | - |
dc.authorscopusid | 57203767094 | - |
dc.authorscopusid | 57206668115 | - |
dc.authorscopusid | 57217399558 | - |
dc.authorscopusid | 57196192661 | - |
dc.identifier.scopusquality | Q1 | - |
item.cerifentitytype | Publications | - |
item.grantfulltext | embargo_20300101 | - |
item.languageiso639-1 | en | - |
item.openairecristype | http://purl.org/coar/resource_type/c_18cf | - |
item.openairetype | Article | - |
item.fulltext | With Fulltext | - |
crisitem.author.dept | 02.10. Department of Mechanical Engineering | - |
Appears in Collections: | Mühendislik ve Doğa Bilimleri Fakültesi Koleksiyonu Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collections WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collections |
Files in This Item:
File | Size | Format | |
---|---|---|---|
1-s2.0-S1359836818339374-main.pdf Until 2030-01-01 | 3.23 MB | Adobe PDF | View/Open Request a copy |
CORE Recommender
SCOPUSTM
Citations
66
checked on Apr 20, 2024
WEB OF SCIENCETM
Citations
84
checked on Apr 20, 2024
Page view(s)
92
checked on Apr 15, 2024
Google ScholarTM
Check
Altmetric
Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.