Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13091/1208
Title: Synthesis of flocculants from waste plastics by sulfonation and investigation of their effectiveness in plastic washing wastewater treatment
Other Titles: Atık plastiklerden sülfolama ile flokülant sentezi ve plastik yıkama atıksuyu arıtımında etkinliğinin belirlenmesi
Authors: Safi, Sofia
Advisors: Yel, Esra
Keywords: Çevre Mühendisliği
Environmental Engineering
Koagülasyon/Flokulasyon
Polimerik Flokülant
Sülfonasyon
Atık Plastik Yıkama Atıksuyu (Wpww)
Coagulation/Flocculation
Polymeric Flocculant
Sulfonation
Waste Plastic Washing Wastewater (Wpww)
Publisher: Konya Teknik Üniversitesi
Abstract: Plastik talebin sürekli artması, her yıl çevrede atık birikiminin artmasına neden olmuştur. Plastiklerin sadece %2'si kapalı devre geri dönüşümlüdür, ancak sektördeki teknolojik ilerlemelerle tüm polimer türleri geri dönüştürülebilir. Sülfonasyon, polimerlerin istenen su emme, biyouyumluluk, iyon değiştirme kapasitesi, şişme, vb. gibi belirli yüzey özelliklerin elde edilmesi için en yaygın yöntemlerden biridir. Plastik geri dönüşüm endüstrisinde, toplanan atık plastikler küçük parçalara kesilerek üzerindeki kirliliklerin giderilmesi için genellikle yıkanması gerekmektedir.Yıkama işleminde ortaya çıkan su atıksu olarak toplanmaktadır. Bu tür atıksularda ana kirletici parametreler, kimyasal oksijen ihtiyacı (KOİ), askıda katı madde (AKM) ve yüksek pH'dır. Böylece yıkama suyunun deşarj edilmeden önce arıtılması gerekmektedir. Bu çalışmada, geleneksel polistiren (PS) sülfonasyon işleminde modifikasyon yapılarak atık PS ve atık PET ile polimerik flokülantlar sentezlenmiştir. Sentezlenen flokülantların yapısı karakterize edilmiştir. Daha sonra sentezlenmiş malzemelerin plastik yıkama atık sularının (WPWW) koagülasyon/flokülasyon ile arıtımında bulanıklık, KOİ ve AKM giderim etkinliği araştırılmıştır. Sentezlenmiş flokülantlar, aynı koşullar altında konvansiyonel PEL ile benzer, hatta daha yüksek performansa sahiptirler. HDPE WPWW'de 50 mg L-1 FSPET2 flokülant dozu ile orjinal pH'da en yüksek bulanıklık giderimi (%86) elde edildi. En yüksek KOİ ve AKM giderimleri (%79 ve %52) PS ve PET WPWW'lerde elde edildi. PS ve HDPE WPWW'lerin arıtma performansları orijinal pH'da yüksekken, LDPE ve PP atıksuları için pH 7'de en iyi arıtma, PET ve Karışık plastik atıksuları için pH 9'da yüksek arıtma işlemi gerçekleştirildi.
The continuous rising of plastic demand led to the growth in waste accumulation in the environment every year. Only 2% of all plastics are closed-loop recycled although with technological advancements in industry all types of polymers can be recycled. Sulfonation is one of the most common methods to modify the surface properties of polymers in order to achieve certain characteristics of desired water absorption, biocompatibility, ion exchange capacity, swelling, etc. In plastics recycling industry the collected waste plastic has been cut into smaller pieces, and then the stock usually needs to be washed in order to remove lingering dirt or attachments. The washing effluent that is produced in washing process is collected as wastewater. The main pollutant parameters in such wastewaters are chemical oxygen demand (COD), suspended solids and high pH. Thus, the washing water needs to be purified prior to discharge. In this study first several polymeric flocculants were synthesized with waste polystyrene (PS) and waste PET by modifying the conventional PS sulfonation process. The synthesized materials were characterized and sulfonation was confirmed. Then the effectiveness of those synthesized materials in coagulation/flocculation treatment of plastic washing wastewaters in terms of turbidity, COD, and TSS removals were investigated. Synthesized flocculants have higher performance under the same conditions as their conventional counterparts, PEL. The highest turbidity removal (86%) was obtained at original pH with a dose of 50 mg.L-1 FSPET2 flocculant in HDPE WPWW and the highest COD (79%) and TSS (52%) removals were achieved in PS and PET WPWWs. PS and HDPE WPWWs treatment performances were high at the original pH, whereas LDPE and PP wastewaters had the best treatment at pH 7, PET and mixed plastic wastewater had high treatment at pH 9.
URI: https://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=jNRDC1RLfVd4_T7x7ZXmmaKhYHWGtK8AKqQDEtgw72TG9zpCuwFXQb-ngCLHjZ5Y
https://hdl.handle.net/20.500.13091/1208
Appears in Collections:Tez Koleksiyonu

Files in This Item:
File SizeFormat 
572955.pdf5.8 MBAdobe PDFView/Open
Show full item record



CORE Recommender

Page view(s)

192
checked on Mar 25, 2024

Download(s)

308
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.