Please use this identifier to cite or link to this item:
https://hdl.handle.net/20.500.13091/106
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Altun, Türkan | - |
dc.contributor.author | Ecevit, Hüseyin | - |
dc.date.accessioned | 2021-12-13T10:19:46Z | - |
dc.date.available | 2021-12-13T10:19:46Z | - |
dc.date.issued | 2019 | - |
dc.identifier.issn | 1019-1011 | - |
dc.identifier.uri | https://app.trdizin.gov.tr/makale/TXpJeU56STNOdz09 | - |
dc.identifier.uri | https://hdl.handle.net/20.500.13091/106 | - |
dc.description.abstract | Bu çalışmada, vişne çekirdeği kabuğu pirolitik çarı (VÇKÇ) elde edilmiş ve bu pirolitik çarın kitosanla karıştırılarak boncukların oluşturulması yoluyla kitosan/pirolitik çar kompozit boncukları (K-VÇKÇ) sentezlenmiştir. Sonrasında VÇKÇ ve K-VÇKÇ boncuklarının sulu çözeltilerden Cr(VI) adsorpsiyonları karşılaştırmalı olarak incelenmiştir. Kesikli adsorpsiyon deneyleri sonucunda; Cr(VI) giderimi için optimum adsorban miktarı VÇKÇ için 5 g/L, K-VÇKÇ için ise 1,5 g/L; optimum pH VÇKÇ için 1,56, K-VÇKÇ için 2, optimum temas süresi 120 dk olarak belirlenmiştir. VÇKÇ ve K-VÇKÇ adsorbanları için adsorpsiyona, Langmuir İzoterm modelinin en uygun model olduğu görülmüştür. Bu izotermden, maksimum adsorpsiyon kapasiteleri VÇKÇ için 14,455 mg/g ve K-VÇKÇ için 86,298 mg/g olarak hesaplanmıştır. Termodinamik hesaplamalar, adsorpsiyonun endotermik ve istemli olduğunu göstermiştir. Adsorpsiyon kinetiği üzerine yapılan hesaplamalar sonucunda adsorpsiyonun yalancı ikinci mertebeden kinetik model ile uyumlu olduğu görülmüştür. Sentezlenen adsorbanların karakterizasyonu SEM/EDX, BET, FTIR ve elementel analiz ile gerçekleştirilmiştir. SEM/EDX ve FTIR analizleri ile Cr(VI)’nın adsorplandığı kanıtlanmıştır. Bu çalışma, VÇKÇ ve K-VÇKÇ’nin sulu çözeltilerden Cr(VI) gideriminde düşük maliyetli ve etkili bir adsorban olabileceğini göstermiştir. | en_US |
dc.description.abstract | In this study, cherry kernel shell pyrolytic charcoal (CKSC) was obtained and chitosan/pyrolitic charcoal (C-CKSC) composite beads were synthesized by mixing this pyrolytic charcoal with chitosan and forming beads. Then, Cr(VI) adsorption of CKSC and C-CKSC beads from aqueous solutions has been studied comparatively. As a result of batch adsorption experiments; the optimum adsorbent amounts for Cr(VI) adsorption are 5 g/L for CKSC and 1.5 g/L for C-CKSC; optimum pHs are 1.56 and 2 for CKSC and C-CKSC respectively; optimum contact time is 120 minutes. The adsorption equilibrium data fitted well with Langmuir isotherm model for CKSC and C-CKSC adsorbents. The maximum adsorption capacities from this isotherm model were calculated as 14.455 mg/g for CKSC and 86.298 mg/g for C-CKSC. Thermodynamic calculations have shown that the adsorption is endothermic and has spontaneous nature. As a result of calculations on the adsorption kinetics, adsorption was found to be consistent with the pseudo second order kinetic model. Characterizations of the synthesized adsorbents were performed by SEM/EDX, BET, FTIR and elemental analysis. SEM/EDX and FTIR analysis proved that Cr(VI) was adsorbed. This study has shown that CKSC and C-CKSC can be effective adsorbents at low cost for Cr(VI) removal from aqueous solutions. | en_US |
dc.language.iso | tr | en_US |
dc.relation.ispartof | Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Mimarlık | en_US |
dc.subject | Mühendislik, Kimya | en_US |
dc.subject | Mühendislik, Elektrik ve Elektronik | en_US |
dc.subject | Mühendislik, Makine | en_US |
dc.title | Kitosan-Vişne Çekirdeği Kabuğu Pirolitik Çarı Kompozit Boncuklarının Sentezi ve Karakterizasyonu: Cr(VI) Gideriminde Kullanılması | en_US |
dc.title.alternative | Syntesis and Characterization of Chitosan-Cherry Kernel Shell Pyrolytic Charcoal Composite Beads: Using at the Cr(VI) Removal | en_US |
dc.type | Article | en_US |
dc.department | Fakülteler, Mühendislik ve Doğa Bilimleri Fakültesi, Kimya Mühendisliği Bölümü | en_US |
dc.identifier.volume | 34 | en_US |
dc.identifier.issue | 3 | en_US |
dc.identifier.startpage | 219 | en_US |
dc.identifier.endpage | 233 | en_US |
dc.relation.publicationcategory | Makale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.identifier.trdizinid | 322727 | en_US |
item.openairetype | Article | - |
item.languageiso639-1 | tr | - |
item.cerifentitytype | Publications | - |
item.grantfulltext | open | - |
item.fulltext | With Fulltext | - |
item.openairecristype | http://purl.org/coar/resource_type/c_18cf | - |
crisitem.author.dept | 02.01. Department of Chemical Engineering | - |
Appears in Collections: | Mühendislik ve Doğa Bilimleri Fakültesi Koleksiyonu TR Dizin İndeksli Yayınlar Koleksiyonu / TR Dizin Indexed Publications Collections |
Files in This Item:
File | Size | Format | |
---|---|---|---|
e06bc8a0-9fe1-4217-bdca-cea5039299d4.pdf | 1.21 MB | Adobe PDF | View/Open |
CORE Recommender
Page view(s)
90
checked on Mar 25, 2024
Download(s)
78
checked on Mar 25, 2024
Google ScholarTM
Check
Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.