Showing results 93 to 152 of 152
< previous
| Issue Date | Title | Author(s) |
| 2022 | KAVİTE ÇIKIŞ KENARININ GÜRÜLTÜ SEVİYESİNE ETKİSİNİN ARAŞTIRILMASI | Yağmur, Sercan ; Doğan, Sercan |
| 2021 | Kinematic Analysis of Mobile Robot with Klann Walking Mechanism | Kavlak, Koray ; Kartal, I.A. |
| 2022 | Kompozit malzemelerin hidrolik silindirlerde kullanılabilirliğinin araştırılması | Coşkun, Taner |
| 2020 | Kompozit Malzemelerin Tornalanması Esnasında Oluşan Kesme Kuvvetlerinin Optimizasyonu | Salur, Emin; Aslan, Abdullah; Kuntoğlu, Mustafa; Güneş, Aydın; Şahin, Ömer Sinan |
| 30-Nov-2019 | Küresel Mekanizma ile Üç Parmaklı Robotik Tutucu Tasarımı | Sağlam, Hacı; Acar, Osman; Şaka, Ziya ; Selçuk Üniversitesi |
| 2020 | A Literature Review on Walking Strategies of Legged Robots | Bakırcıoğlu, Veli; Kalyoncu, Mete |
| 2021 | Long-term salt-water durability of GNPs reinforced basalt-epoxy multiscale composites for marine applications | Şükür, Emine Feyza; Önal, Gürol |
| 2021 | Low Velocity Impact and Tensile Performance of GFRPs Interleaved with Electrospun Nylon 6,6 Nanofiber Mats | Yıldız, Murat; Yapıcı, Ahmet; Özkan, Vildan; Şahin, Ömer Sinan |
| 2022 | Low-velocity impact response and inspection of damage propagation for basalt fiber reinforced filament wound pipes | Demirci, Mehmet T.; Şahin, Ömer S. |
| 2022 | MAKİNE KONSTRÜKSİYONUNDA KULLANILABİLİRLİK İÇİN HASTELLOY C-22 SÜPER ALAŞIMININ AŞINMA DİRENCİNİN KRİYOJENİK İŞLEM İLE ETKİLEŞİMİNİN İNCELENMESİ | Çetin, M. Hüseyin ; Gül, Muhammed Salih; Gökkaya, Hasan; Kondul, Bilgehan |
| 2021 | Measuring curvature of trajectory traced by coupler of an optimal four-link spherical mechanism | Acar, Osman; Sağlam, Hacı; Şaka, Ziya |
| 2022 | Mechanical and dynamic responses of unidirectional/woven carbon fiber reinforced thermoset and thermoplastic composites after low velocity impact | Kayaaslan, Melihcan; Coşkun, Taner ; Şahin, Ömer Sinan ; Ünlü, Ulaç M.; Kadioğlu, Ferhat |
| 2021 | Meta-Heuristic Tuning of the LQR Weighting Matrices Using Various Objective Functions on an Experimental Flexible Arm Under the Effects of Disturbance | Bilgiç, Hasan Hüseyin; Şen, Muhammed Arif ; Yapıcı, Ahmet; Yavuz, Hakan; Kalyoncu, Mete |
| 2022 | Microstructural Characterization of Improved Formability of Ti-6Al-4V Sheet by Pulsating Hydraulic Bulging at Room Temperature | Yapan, Yusuf Furkan; Öztürk, Osman ; Türköz, Mevlut; Dilmeç, Murat; Livatyali, Haydar; Halkacı, Huseyin Selçuk; Kotan, Hasan |
| 2022 | MODELING OF ELECTRO-HYDRAULIC SERVO SYSTEM USING THE BEES ALGORITHM | Çakan, Abdullah ; Botsalı, Fatih Mehmet ; Önen, Ümit; Kalyoncu, Mete |
| 2019 | NEWTON TİPİ OLMAYAN AKIŞKAN KULLANARAK KALP DESTEK POMPASININ PERFORMANSININ HESAPLAMALI AKIŞKANLAR MEKANİĞİ YÖNTEMİ İLE İNCELENMESİ | Sabah, Ahmet; Yapıcı, Rafet |
| 2021 | A Novel Design of Interval Type-2 Neuro-Fuzzy Controller for Flexible Structure | Tınkır, Mustafa; Kalyoncu, Mete ; Sezgen, Haşmet Çağrı |
| 2022 | Numerical and experimental investigation of the effect of double-sided hydroforming process on wrinkling damage by optimizing loading curves with adaptive control | Akay, Selahattin Burak; Halkacı, Hüseyin Selçuk ; Öztürk, Ekrem; Öztürk, Osman ; Atas, Gürkan; Aydın, Mevlüt ; Türköz, Mevlüt ; Dilmeç, Murat |
| 2019 | Numerical comparison of thermal and hydraulic performances for heat exchangers having circular and elliptic cross-section | Doğan, Sercan ; Darıcı, Selçuk ; Özgören, Muammer |
| 2021 | Numerical evolution of unsteady wake characteristics of H-type Darrieus Hydrokinetic Turbine for a hydro farm arrangement | Yağmur, Sercan ; Köse, Faruk |
| 2020 | Numerical Examination of Heat Transfer Augmentation between the Plates with Square Cross-Sectional Ribs for the Staggered Arrangement | Göktepeli, İlker ; Atmaca, Ş. Ulaş |
| 2022 | Numerical investigation and experimental verification of the proposed robot leg virtual model | Bakırcıoğlu, Veli; Şen, Muhammed Arif ; Kalyoncu, Mete |
| 2020 | Numerical optimization of warm hydromechanical deep drawing process parameters and its experimental verification | Türköz, Mevlüt ; Cora, Ömer Necati; Gedikli, Hasan; Dilmeç, Murat; Halkacı, Hüseyin Selçuk ; Koç, Muammer |
| 2021 | Optimal PID and fuzzy logic based position controller design of an overhead crane using the Bees Algorithm | Esleman, Esmael Adem; Önal, Gürol ; Kalyoncu, Mete |
| 2021 | Optimal Tuning of the SMC Parameters for a Two Two-Link Manipulator Co-Simulation Control | İlgen, Sinan; Durdu, Akif ; Gülbahçe, Erdi; Çakan, Abdullah |
| 2021 | Optimization and effects of machining parameters on delamination in drilling of pure and Al2O3/SiO2-added GFRP composites | Ünüvar, Ali; Koyunbakan, Murat; Bağcı, Mehmet |
| 2019 | Optimization and prediction of thrust force, vibration and delamination in drilling of functionally graded composite using Taguchi, ANOVA and ANN analysis | Köklü, Uğur; Mayda, Murat; Morkavuk, Sezer; Avcı, Ahmet; Demir, Okan |
| 2022 | Optimization of Electricity Generation Parameters with Microbial Fuel Cell Using the Response Surface Method | Neşeli, Süleyman; Dinçer, Kevser ; Taşdemir, Şakir; Hayder, Mustafa Akram |
| 2021 | Optimization Study on Surface Roughness and Tribological Behavior of Recycled Cast Iron Reinforced Bronze MMCs Produced by Hot Pressing | Güneş, Aydın; Şahin, Ömer Sinan ; Düzcükoğlu, Hayrettin; Salur, Emin; Aslan, Abdullah; Kuntoğlu, Mustafa; Pimenov, Danil Yurievich |
| 16-Jun-2020 | Ön ayarlı tork emniyeti kilit tertibatı | Şahin, Ömer Sinan ; İmaş Makina |
| 2019 | Parametric Euler-Savary Equations For Spherical Instantaneous Kinematics | Acar, Osman; Şaka, Ziya ; Özçelik, Z. |
| 2019 | Performance comparison of optimization algorithms in LQR controller design for a nonlinear system | Önen, Ümit; Çakan, Abdullah ; İlhan, İlhan |
| 2022 | PERFORMANCE INVESTIGATION OF BIFACIAL PHOTOVOLTAIC PANELS AT DIFFERENT GROUND CONDITIONS | Aksoy, Muharrem Hilmi ; Çalık, Murat Kubilay |
| 2022 | Polinom tipi sabit çaplı kam mekanizmalarının kinematik analizi | Ayğahoğlu, Mert Eren |
| 2020 | Prediction of residual stresses in ball burnishing TI6AL4V thin sheets | Livatyalı, Haydar; Has, Ergül; Türköz, Mevlüt |
| 2021 | Prediction of Yoshida Uemori model parameters by the bees algorithm and Genetic Algorithm for 5xxx series aluminium alloys | Korkmaz, Habip Gökay; Toros, Serkan; Kalyoncu, Mete |
| 2021 | Production and thermal characterization of MWCNT reinforced polimethyl methacrylate (PMMA) nanofibers by electrospinning | Ekrem, M.; Özten, U,; Şahin, Ömer Sinan |
| 2019 | Proposal of a Harmonic Bees Algorithm for Design Optimization of a Gripper Mechanism | Acar, Osman; Kalyoncu, M. ; Hassan, A. |
| 2019 | Saf suyun alüminyum-kompozit levhaların yapıştırma bağlantılarındaki naylon 6.6 nanofiber takviyeli yapıştırıcılara etkisi | Tatar, Ahmet Caner |
| 2021 | Selectively Reinforced Functionally Graded Composite-like Glass/Carbon Polymer Nanocomposites: Designed for Efficient Bending and Impact Performance | Demir, Okan ; Tatar, Ahmet Caner ; Eskizeybek, Volkan; Avcı, Ahmet |
| 2018 | Serbest yüzey ve bir küre art izi arasındaki etkileşimlerin araştırılması | Doğan, Sercan ; Özgören, Muammer; Okbaz, Abdulkerim; Şahin, Beşir; Akıllı, Hüseyin |
| 2021 | Simulation and arduino hardware implementation of dc motor control using sliding mode controller | Maarif, A.; Çakan, Abdullah |
| 2023 | Solid Particle Erosion Behavior on the Outer Surface of Basalt/Epoxy Composite Pipes Produced by the Filament Winding Technique | Demet, Seyit Mehmet ; Sepetcioğlu, Harun; Bagci, Mehmet |
| 2022 | Solid Particle Erosion Wear Behaviors of Recycled PA 3200 GF Powders Produced by Selective Laser Sintering Method in Different Abrasive Environmental Conditions | Bağcı, Mehmet ; Demirci, Musa; Nesimioglu, Baris Samim |
| 2021 | Strength and Modal Analysis of Mobile Robot with Klann Walking Mechanism | Kavlak, Koray ; Taner, Y.O. |
| 2021 | A study on performance and flow characteristics of single and double H-type Darrieus turbine for a hydro farm application | Yağmur, Sercan ; Köse, Faruk ; Doğan, Sercan |
| 2022 | A study on the effect of the roller burnishing process on the axial fatigue performance and surface integrity of AISI 4340 steel | Aydın, Mevlüt ; Türköz, Mevlüt |
| 2019 | System identification based inverse kinematics analysis and control of a multi?dof road simulator | Çakan, Abdullah ; Önen, Ü.; Botsalı, F.M. |
| 2020 | Tekerlekli askeri araç bileşenlerinin titreşim kaynaklı yorulma analizleri | Gümüş, Mehmet Sefa |
| 2021 | Time and volume-ratio effect on reusable polybenzoxazole nanofiber oil sorption capacity investigated via machine learning | Oflaz, Kamil; Oflaz, Zarina; Özaytekin, İlkay ; Dinçer, Kevser ; Barstuğan, Rabia |
| 2019 | Topology design and modal analysis of a Bracket via FEA | Gülbahçe, E.; Sezgen, H.Ç.; Çakan, Abdullah |
| 2021 | Towards Analysis and Optimization for Contact Zone Temperature Changes and Specific Wear Rate of Metal Matrix Composite Materials Produced from Recycled Waste | Güneş, Aydın; Salur, Emin; Aslan, Abdullah; Kuntoğlu, Mustafa; Giasin, Khaled; Pimenov, Danil Yurievich; Şahin, Ömer Sinan |
| 2018 | Transient heat transfer in pipes with time periodically changing boundary condition | Altun, A.H.; Ateş, A.; Atmaca, Şükrü Ulaş ; Koçak, Sedat; Bilir, Şefik |
| 2020 | Turbulence modeling approaches on unsteady flow structures around a semi-circular cylinder | Yağmur, Sercan ; Doğan, Sercan ; Aksoy, Muharrem Hilmi ; Göktepeli, İlker |
| 2022 | Türkiye için CO2 booster soğutma sistemlerinin süpermarket uygulamalarının termodinamik analizi | Işık, Metehan |
| 2022 | ULTRA YÜKSEK BASINÇTA ÇALIŞAN KALIN CİDARLI SİLİNDİRLERİN TASARIMINA ETKİ EDEN PARAMETRELERİN SAYISAL VE ANALİTİK OLARAK ARAŞTIRILMASI | Aydın, Mevlüt ; Türköz, Mevlüt ; Yapan, Yusuf Furkan |
| 2020 | USE OF PUMPED HYDRO ENERGY STORAGE TO COMPLIMENT WIND ENERGY A Case Study | Köse, Faruk ; Kaya, Mehmet Numan; Özgören, Muammer |
| 2021 | VISUALIZATION OF FLOW CHARACTERISTICS BETWEEN THE RIBBED PLATES VIA PARTICLE IMAGE VELOCIMETRY | Göktepeli, İlker ; Atmaca, Şükrü Ulaş ; Yağmur, Sercan |
| 2020 | Weight optimization of hybrid composite laminate using learning-oriented artificial algae algorithm | Yibre, Abdulkerim Mohammed; Koçer, Barış; Esleman, Esmael Adem; Önal, Gürol |
| 2021 | Yüksek basınç altındaki hidrolik silindirlerin yorulma performanslarının iyileştirilmesi | Aydın, Mevlüt |
